UAP with parallel flanges

Product catalog summary

Overview: This document provides technical specifications for UAP channels with parallel flanges. It includes details on tolerances, material grades, and dimensions, as well as the manufacturing process for these profiles.

Specifications:

Tolerances: According to EN 10279 Table 2.
Material Grade: According to EN 10088-3: 1D.

Dimensions and Weights:

The document lists various UAP profiles with dimensions (height, width, thickness) and corresponding weights in kg/m.
Examples include UAP 50x25x3 with a weight of 2.30 kg/m and UAP 200x100x10 with a weight of 30.4 kg/m.

Manufacturing Process:

Profiles marked with an asterisk (*) are laser fused with parallel flanges.
These profiles have full penetration welding, equivalent to hot-rolled profiles.
r1 indicates the laser welded seam, and r2 indicates a sharp corner.

Contact Information:

Company: Montanstahl AG
Address: Via Gerrette 4, CH – 6855 Stabio
Phone: +41-(0)91-641 68 00
Fax: +41-(0)91-641 68 01
Website: www.montanstahl.com

Catalog excerpts

Open the catalog to page 1

UAP – Channels with parallel flanges Tolerances according to EN 10279 Tab. 2, grade according to EN 10088-3: 1D UPA - Fers U à ailes parallèles Tolérances selon EN 10279 Tab. 2, nuance selon EN 10088-3: 1D UAP - Profile mit parallelen Flanschen Toleranzen nach EN 10279 Tab. 2, Güte nach EN 10088-3: 1D Désignation Designation Bezeichnung Poid Weight Gewicht * Profiles are laser fused and the flanges are parallel. Full penetration, equivalent to hot rolled . r1 = laser welded seam, r2 = sharp corner. MONTANSTAHL AG Via Gerrette 4 CH – 6855 Stabio * Profils sont soudé a laser et les ailes sont parallel....

Open the catalog to page 2

UAP with parallel flanges

UAP with parallel flanges

Catalog excerpts

All Montanstahl catalogs and technical brochures