Equal angles - standard

Product catalog summary

Overview: This document from Montanstahl AG provides technical specifications for equal leg angles, which are structural steel profiles. The document outlines compliance with European standards and provides detailed dimensions and weights for various sizes of these profiles.

Specifications: The equal leg angles conform to EN 10056-1 for dimensions, EN 10056-2 for tolerances, and are graded according to EN 10088-3: 1D. These standards ensure the profiles meet specific quality and dimensional criteria.

Dimensions and Weights: The document lists a range of equal leg angles with varying dimensions. Each entry includes the height (h), width (b), thickness (t), and approximate radii (r1 and r2), along with the weight per meter (G) in kilograms. The radii are noted as approximate, indicating slight variations may occur.

Manufacturing Notes: Some profiles are laser fused, which provides full penetration welding equivalent to hot rolling. This process results in a laser-welded seam (r1) and a sharp corner (r2). For certain larger profiles, a minimum order quantity of 40 tons is required for production.

Key Considerations: The document emphasizes the importance of adhering to specified standards for quality assurance. The approximate nature of the radii and the minimum order requirements for larger profiles are critical considerations for potential buyers.

Catalog excerpts

In accordance with EN 10056-1, tolerances according to EN 10056-2, grade according to EN 10088-3: 1D Cornières à ailes égales Conformes à EN 10056-1, tolérances selon EN 10056-2, nuance selon EN 10088-3: 1D Gleichschenkliger Winkelstahl Gemäß EN 10056-1, Toleranzen nach EN 10056-2, Güte nach EN 10088-3: 1D Désignation Designation Bezeichnung Poid Weight Gewicht MONTANSTAHL AG Via Gerrette 4 CH – 6855 Stabio Rayons r1 et r2 sont indicatives. Radien r1 und r2 sind indikativ.

Open the catalog to page 1

Open the catalog to page 2

In accordance with EN 10056-1, tolerances according to EN 10056-2, grade according to EN 10088-3: 1D Cornières à ailes égales Conformes à EN 10056-1, tolérances selon EN 10056-2, nuance selon EN 10088-3: 1D Gleichschenkliger Winkelstahl Gemäß EN 10056-1, Toleranzen nach EN 10056-2, Güte nach EN 10088-3: 1D Désignation Designation Bezeichnung Poid Weight Gewicht * Profiles are laser fused. Full penetration, equivalent to hot rolled . r1 = laser welded seam, r2 = sharp corner. * Profils sont soudé a laser. Pénétration complet, équivalent a laminé à chaud. r1 = cordon laser, r2 = angle vif. * Profile...

Open the catalog to page 3

In accordance with EN 10056-1, tolerances according to EN 10056-2, grade according to EN 10088-3: 1D Cornières à ailes égales Conformes à EN 10056-1, tolérances selon EN 10056-2, nuance selon EN 10088-3: 1D Gleichschenkliger Winkelstahl Gemäß EN 10056-1, Toleranzen nach EN 10056-2, Güte nach EN 10088-3: 1D Désignation Designation Bezeichnung Poid Weight Gewicht * Profiles are laser fused. Full penetration, equivalent to hot rolled . r1 = laser welded seam, r2 = sharp corner. * Profils sont soudé a laser. Pénétration complet, équivalent a laminé à chaud. r1 = cordon laser, r2 = angle vif. * Profile...

Open the catalog to page 4

Equal angles - standard

Equal angles - standard

Catalog excerpts

All Montanstahl catalogs and technical brochures