Next generation natural ventilation system

WINDCATCHER® X-Air next generation natural ventilation system features yy Computer generated aerodynamic design delivers greater ventilation rate yy ACTIVLOUVRE system provides enhanced ventilation control and ultimate weather protection yy Integral solar powered architectural lighting system The Monodraught WINDCATCHER X-Air is the next generation of natural ventilation that follows in the footsteps of the successful WINDCATCHER classic systems that have proved to be so popular ACTIVLOUVRE® modulating aerofoil louvre technology Patent No. 1011356.1/European patent pending The ACTIVLOUVRE technology...

External Air Catchment Fins Patent No. 1012116.8 Swept Divider Patent No.1012115.0 The External Air Catchment Fins are located on each corner of the WINDCATCHER X-Air and comprises of a tear drop profile light tube and a pressure release fin. At low wind speeds, the fins are used to increase the area across the face of the system. This increases the positive and negative pressure on the windward and leeward faces respectively, and increases the total rate of air flow through the system. When wind speed is high the rubber fin flexes, helping to relieve excessive wind loading. Monodraught WINDCATCHER...

Composite Upstand Monodraught have developed an insulated upstand arrangement to be used with the WINDCATCHER X-Air. The upstand is a multi-layer construction allowing for high levels of insulation, and also ensures every system maintains an air tight seal and reduces install times to a minimum. The WINDCATCHER X-Air can be installed onto flat roofs, and roofs with a pitch of up to 35°. Manufacturer: Monodraught Ltd, Halifax House, Cressex Business Park, High Wycombe, Bucks, HP12 3SE. Linear actuator Capping with integrated solar panel Internal Divider ACTIVLOUVRE Assembly NOTE: Upstand to protrude...