Catalogs >
Molteni&C >
505 up

505 up
1 / 19Pages

Catalog excerpts

505 UP - SYSTEM — NICOLA GALLIZIA 2021 1— 19 A modular, versatile and contemporary system that converges system design and the aesthetics of the finished unit. Each composition is unique. Designed to meet the owner’s aesthetic and functional needs, it is created to suit his or her lifestyle, like a tailoredsuit or dress. DATASHEET REGISTERED DESIGN IX.2021 Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based on the latest product information available at the time of printi

Open the catalog to page 1

505 UP - SYSTEM— NICOLA GALLIZIA 2021 Notes A minimum space of 3 cm (1 1/8”) in height is required for assembly, and in the case of installation in a compartment, the width is necessary: - 4 cm (1 5/8”) for floor compositions (2 cm - 3/4” per side) - 6 cm (2 3/8”) for wall-hung compositions (3 cm - 1 1/8” per side) For cuts in the three dimensions (width, height, depth) the reduction is carried out to the millimetre; in all cases the cost of the reduction is borne by the customer. The module width can be reduced by up to 320 mm - 12 5/8” (centre distance): the W 320 - 12 5/8” module cannot...

Open the catalog to page 2

505 UP - SYSTEM— NICOLA GALLIZIA 2021 Wood grain Pressure opening th 35 - HORIZONTAL GRAIN for vertical sliding, drawers and flap doors Pressure opening th 22 - HORIZONTAL GRAIN for drawers - VERTICAL GRAIN for hinged doors matt lacquer colours glossy lacquer colours special woods pewter colour / copper transparent stopsol net transparent glass glass glass coloured glass/ coloured etched glass 32 mm th. structure and base back panels rear finish panels internal drawers shelves tops protruding shelf D 540 mm TV back panel central dividing glass panel profile glass 12 mm thick central...

Open the catalog to page 3

505 UP - SYSTEM— NICOLA GALLIZIA 2021 Modules must always have full or divided backs 16 th. Double-sided compositions can be made with back panels. The presence of back panels or rear finish panels is essential for the stability of the compositions. Any requests for modules with opening compartments must be examined by the Molteni Technical Office as they could compromise the stability of the composition. In the compartments where they are installed protruding elements DISPLAY it is necessary to break up the back panels In the compartments where it is installed the protruding shelf it is...

Open the catalog to page 4

505 UP - SYSTEM— NICOLA GALLIZIA 2021 MODULES CONSTRUCTION 1280-1440-1920 (50 3/8” - 56 3/4” - 75 5/8”) For the construction of these modules, it is mandatory to have in each compartment: - 16 mm th back panel (always in module width) - one or more central dividing panels (wood, 32 mm th - glass, 10 mm th or rounded, 12 mm th) positioned at 160 mm intervals at a maximum distance of 960 mm for 1280/1440 mm wide compartments - two or more central dividing panels positioned at 160 mm intervals at a maximum distance of 960 mm for W 1920 compartments. This construction does not require...

Open the catalog to page 5

505 UP - SYSTEM— NICOLA GALLIZIA 2021 DISPLAY with hinged door or open compartment W 608 reinforced shelf reinforced shelf reinforced shelf reinforced shelf DISPLAY with vertical sliding door W 1248 reinforced shelf DISPLAY with hinged door or open compartment W 608 reinforced shelf reinforced shelf DISPLAY with flap door, drawer or open compartment W 928 - W 1248 reinforced shelf reinforced shelf reinforced shelf DISPLAY with vertical sliding door W 1248 reinforced shelf DISPLAY with flap door, drawer or open compartment W 928 - W 1248 The protruding DISPLAY elements can be freely inserted...

Open the catalog to page 6

MODULES CONSTRUCTION 1280-1440-1920 (50 3/8” - 56 3/4” - 75 5/8”) \W 1280-1440-1920 compartments can be used for the installation of glass doors with glass side panels. In this case, the shelves are full size flush with the panels and the central glass dividers are always H 1 module. 505 UP - SYSTEM— NICOLA GALLIZIA 2021 full size shelf full size shelf central sides glass partitions H 1 module central sides glass partitions H 1 module side section back th 16 central glass panel H 1 module glass door H max 3 modules central glass panel H 1 module shelves th 32 module width DATASHEET...

Open the catalog to page 7

505 UP - SYSTEM— NICOLA GALLIZIA 2021 HOLE DIAGRAM FOR SIDES Drilling of panels for shelf positioning is available in these modes to be specified when ordering: A - Holes in shelves only B - 3-hole set (64 mm centre distance) distance 384 mm C - Regular interval 64 mm - with surcharge If there are no specific indications, type B drilling will be carried out - group 3 holes. The individual columns of a composition can have different perforations. Within the column the type of drilling cannot vary. Notes Wall mounted panels have no holes for shelves in the upper part for mm 400 (see design)....

Open the catalog to page 8

505 UP - SYSTEM— NICOLA GALLIZIA 2021 When the module of the smaller depth is open, the change of depth is made by directly attaching the components of this module to the adjacent panel of the larger depth (example 1). When the module of the smallest depth is closed with doors or drawers, the change of depth is achieved by combining two compositions of different depths (example 2). Finishing tops in glass and marble cannot be used in situations where there is a change in depth. Any top on composition with change of depth will always be supplied in two parts. With the change in height, the...

Open the catalog to page 9

505 UP - SYSTEM— NICOLA GALLIZIA 2021 INTERNAL DRAWER UNITS For open compartments, hinged glass doors and 22 mm th. hinged wood pressure opening doors The drawer units can be inserted between two standard 32 mm thick shelves (example A). The drawers are always pressure-opening and always fully extractable. The drawers are flush with the structure for open compartments while they are set back by 18 mm (in alignment with internal shelves) when installed in hinged glass doors. * woods eucalyptus, graphite oak DATASHEET REGISTERED DESIGN IX.2021 Dimensions in millimeters and inches. The right...

Open the catalog to page 10