suvSLOPE - technical card
8Pages

SUVSLOPE RKING SYSTEM MODULO suvSLOPE is an independent parking system, which in the way it works is similar to one of our flagship products - MODULO SLOPE. Thanks to the modified construc on and the milder slope of the pla orms, it allows for adjus ng the height of individual parking spaces to the needs of the customer and various vehicles - including also for large cars such as SUVs. Like the SLOPE, it is also possible to be installed in garage halls with a limited height. The system is available in the SINGLE version, designed for parking two cars simultaneously, and DUAL dedicated for four cars. BUILDING STRUCTURE DIMENSIONS Free space for installa on works The example shown here presents configura on 195/200. Enter only by front of the car! Earth ground Drainage

The device is designed for parking of the following types of passenger cars: limousine, station wagon, van, SUV - depending on car dimensions and weight. DIMENSIONS OF THE PIT DEPENDING ON THE MAXIMUM HEIGHT OF THE PARKED CARS Increase height on dim. H2 allows parking higher cars on the upper platform (evenly with change). Height 2 modulo ' www.moduloparking.com

SINGLE SUVSLOPE * Configurations 230, 460 and 470: with the car's catalog width of 190 cm, the user has less than 50 cm of space for access (wider platforms are recommended) CONSTRUCTION REQUIREMENTS 1. The devices have to be anchored to a concrete floor by M12 chemical (adhesive) anchors, with hole depth of ca. 12 cm. The floor should be made of at least class C20/25 concrete, minimum floor thickness - 15 cm. Installation of all systems and structures that have to be installed in the same space as the parking system must be carried out in such a way that the parked cars are not at risk of...

COLUMNS OF THE BUILDING STRUCTURE IN THE PIT Platform working width Platform working width COLUMNS OF THE BUILDING STRUCTURE OUTSIDE THE PIT SINGLE SUVSLOPE Platform working width

OPERATION (PARKING POSITIONS OF THE SYSTEM) PARKING POSITION ‘UP’ PARKING POSITION ‘DOWN’ DIMENSIONS OF DRIVEWAYS / RAMPS MAXIMUM GRADIENT OF DOWNSLOPE DRIVEWAY 2% MAXIMUM GRADIENT OF UPSLOPE DRIVEWAY 1

DESCRIPTION OF THE PARKING SYSTEM STRUCTURE The MODULO suvSLOPE parking system is a device that mul plies the number of parking spaces in a independent manner. The device is powered by a hydraulic power unit. Each device is equipped with an individual control panel that is protected against use by unauthorised persons with a unique key assigned to it. Opera on of the device follows the ‘keep pushed to actuate’ principle. Each control panel has an emergency switch used to stop the device in hazardous situa ons. Each parking space provides correct car posi on adjustment by moveable buffers on...

DESCRIPTION OF THE PARKING SYSTEM STRUCTURE MAINTENANCE: In order for the device lifecycle to be as long and failure-free as possible, follow the maintenance manual, and establish proper ven la on. CORROSION PROTECTION: The steel structure is protected against corrosion by design. Corrosion protec on class C3 (medium) as per PN-EN ISO 12944-2 has been adopted, annual loss of zinc coa ng in this class amounts to 0.7÷2.1 µm. AMBIENT CONDITIONS: Temperature range: -15°C ÷ +40°C (op onal range: from -30°C or up to +50°C). Opera ng me of the car park is longer in lower temperatures or in case of...

To download technical sheets and catalog in electronic version and .dwg files for each of our products, please visit our website www.moduloparking.com/en/files-to-download Photos from our projects are available at: Contact us: tel. (+48) 52 326 70 71 office@moduloparking.com www.moduloparking.com Find out more about our Modulo Parking Systems on our blog: