SLOPE - technical card
8Pages

PARKING SYSTEM The construc on of this system, based on the delicate slant of the lower pla orm, allows you to double parking spaces in the garage hall, keeping the appropriate space in rela on to the height of a specific parking space. This is par cularly important for underground car parks with a limited height. MODULO SLOPE is dedicated to garage halls and underground garages. However, it is mainly intended for those investments in which we have limita ons related to the height of the roof or the depth of the basin (eg in the case when groundwater prevents deep excava ons). We also save here at the height of the building itself, which we can develop for the next storey. BUILDING STRUCTURE DIMENSIONS Free space for installa on works Free space for installa on works Earth ground

The device is designed for parking of the following types of passenger cars: limousine, station wagon, van, SUV - depending on car dimensions and weight. DIMENSIONS OF THE PIT DEPENDING ON THE MAXIMUM HEIGHT OF THE PARKED CARS Increasing the height by incrementing H2 allows correspondingly taller cars to be parked on the upper platform. In case of the 150/310 size, station wagons may be parked if the space for installation works is _|_ free. The required space is labelled as [1].

SINGLE SLOPE In case of the 230, 460, and 470 size and the car stated width of 190 cm, the user has less than 50 cm of access space (wider platforms are recommended). CONSTRUCTION REQUIREMENTS 1. The devices have to be anchored to a concrete floor by M12 chemical (adhesive) anchors, with hole depth of ca. 12 cm. The floor should be made of at least class C20/25 concrete, minimum floor thickness - 15 cm. Installation of all systems and structures that have to be installed in the same space as the parking system must be carried out in such a way that the parked cars are not at risk of being...

COLUMNS OF THE BUILDING STRUCTURE IN THE PIT Platform working width Platform working width COLUMNS OF THE BUILDING STRUCTURE OUTSIDE THE PIT Platform working width Platform working width

DZIAŁANIE - POZYCJE POSTOJOWE SYSTEMU PARKING POSITION ‘DOWN’

DESCRIPTION OF THE PARKING SYSTEM STRUCTURE The MODULO SLOPE parking system is a device that mul plies the number of parking spaces in a independent manner. The device is powered by a hydraulic power unit. Each device is equipped with an individual control panel that is protected against use by unauthorised persons with a unique key assigned to it. Opera on of the device follows the ‘keep pushed to actuate’ principle. Each control panel has an emergency switch used to stop the device in hazardous situa ons. Each parking space provides correct car posi on adjustment by moveable buffers on the...

DESCRIPTION OF THE PARKING SYSTEM STRUCTURE AVAILABLE DOCUMENTS: User and maintenance manual, abridged user manual, declara on of conformity, structure founda on plan, maintenance offer/agreement. Pursuant to the applicable regula ons, car parking systems are subject to acceptance by the Technical Inspec on Authority. The manufacturer provides the required documenta on related to the device. The customer is under an obliga on to provide a construc on acceptance report for the floor. MAINTENANCE: In order for the device lifecycle to be as long and failure-free as possible, follow the...

To download technical sheets and catalog in electronic version and .dwg files for each of our products, please visit our website www.moduloparking.com/en/files-to-download Photos from our projects are available at: Contact us: tel. (+48) 52 326 70 71 office@moduloparking.com www.moduloparking.com Find out more about our Modulo Parking Systems on our blog: