RKING SYSTEM MODULO SLANT is a system that works great in places with limited height – the upper pla orm is inclined to the lower parking space and lowered at a small angle, so as to maximize the available space. This solu on is ideal for garages with low ceilings, inter alia in mul -family buildings or public ins tu ons. It is the lightest of all MODULO Parking Systems. What is important, to be able to use it, it is 2.5 m wide, which is only as much as the standard parking space. BUILDING STRUCTURE DIMENSIONS Free space for installa on works Free space for installa on works Earth ground 530 for 480 cm long cars

DIMENSIONS OF THE PIT DEPENDING ON THE MAXIMUM HEIGHT OF THE PARKED CARS In case of height values 155/290 and 170/305, station wagons entering level 1 can only do so by reverse parking. Parking at level 0 can only be done frontally.

Platform working width COLUMNS OF THE BUILDING STRUCTURE Platform working width

OPERATION (PARKING POSITIONS OF THE SYSTEM) Please keep in mind that you can drive onto/off the pla orm (LEVEL 1) only a er the vehicle at LEVEL 0 drives out! Pla orm entry posi on (LEVEL 1) DIMENSIONS OF DRIVEWAYS / RAMPS MAXIMUM GRADIENT OF DOWNSLOPE DRIVEWAY 4% ATTENTION! Do not exceed the specified access angle. Non-compliance with this note can result in car damage for which the manufacturer shall not be held liable. MAXIMUM GRADIENT OF UPSLOPE DRIVEWAY 10% Pla orm entry posi on (LEVEL 0

CONSTRUCTION REQUIREMENTS 1. The devices have to be anchored to a concrete floor by M12 chemical (adhesive) anchors, with hole depth of ca. 12 cm. The floor should be made of at least class C20/25 concrete, minimum floor thickness – 15 cm. Installa on of all systems and structures that have to be installed in the same space as the parking system must be carried out in such a way that the parked cars are not at risk of being crushed. 2. The ordering party is responsible for designing and implemen ng a ven la on and fire protec on system in accordance with applicable regula ons. The contrac ng authority...

DESCRIPTION OF THE PARKING SYSTEM STRUCTURE The MODULO SLANT parking system is a device that mul plies the number of parking spaces in a independent manner MODULO SLANT allows mul -level car parking even with lower ceiling height in comparision to other systems. The devices are powered by hydraulic power units. Device group division and the number of hydraulic power units are determined on an individual, case-to-case basis. Each device is equipped with an individual control panel that is protected against use by unauthorised persons with a unique key assigned to it. Opera on of the device follows...

DESCRIPTION OF THE PARKING SYSTEM STRUCTURE AVAILABLE DOCUMENTS: User and maintenance manual, abridged user manual, declara on of conformity, structure founda on plan, maintenance offer/agreement. Pursuant to the applicable regula ons, car parking systems are subject to acceptance by the Technical Inspec on Authority. The manufacturer provides the required documenta on related to the device. The customer is under an obliga on to provide a construc on acceptance report for the floor. MAINTENANCE: In order for the device lifecycle to be as long and failure-free as possible, follow the maintenance...

To download technical sheets and catalog in electronic version ar .dwg files for each of our products, please visit our website Photos from our projects are available at Find us on Facebook! Find out more about our Modulo Parking Systems on our blog: moduloparking.com/en/blog