SCISSOR - technical card
8Pages

QjrpENDENT PARKING SYSTEM MODULO SCISSOR is a system based on a unique scissor mechanism. It allows for extremely comfortable, and at the same time very visually attractive storage of two cars using only one traditional parking space. This solution is ideal for collectors and car dealers who want to present vehicles sold in an interesting way, while saving space. SCISSOR will also be great at all kinds of fairs and motor shows. One of its advantages is the possibility of folding flat: so that no elements of the system's structure project beyond the platform. Thanks to this, the system can also be perfectly used outdoors. BUILDING STRUCTURE DIMENSIONS OPTION 1 INDOOR INSTALLATION OPTION 2 OUTDOOR INSTALLATION

MINIMUM DIMENSIONS OF THE BUILDING STRUCTURE - VERTICAL PROJECTION - OPTION 1 Platform working width Platform working width

MINIMUM DIMENSIONS OF SPACES BETWEEN SYSTEMS – OPTION 2 OPERATION (PARKING POSITIONS OF THE SYSTEM) - OPTION 1 / OPTION 2 Please keep in mind that you can drive onto/off the pla orm (LEVEL 1) only a er the vehicle at LEVEL 0 drives out! LEVEL 1 LEVEL 0 Pla orm entry posi on (level 1) Pla orm entry posi on (level 0)

DIMENSIONS OF DRIVEWAYS / RAMPS - OPTION 1 / OPTION 2 MAXIMUM GRADIENT OF DOWNSLOPE DRIVEWAY 5% ATTENTION! Do not exceed the specified access angle. Noncompliance with this note can result in car damage for which the manufacturer shall not be held liable. MAXIMUM GRADIENT OF UPSLOPE DRIVEWAY 1% BASE FLOOR PREPARATION – OPTION 1 LOAD PLAN AND FASTENING REQUIREMENTS – OPTION 2 Concrete slab weight (4.5 t) Areas in grey are the grooves that have to be prepared in order to install the system. At least 5 cm groove in the concrete floor (parallel levelling of the grooves is recommended) Loads on...

CONSTRUCTION REQUIREMENTS 1. The devices have to be anchored to a concrete floor by M12 chemical (adhesive) anchors, with hole depth of ca. 12 cm. The floor should be made of at least class C20/25 concrete, minimum floor thickness – 15 cm. Installa on of all systems and structures that have to be installed in the same space as the parking system must be carried out in such a way that the parked cars are not at risk of being crushed. 2. The ordering party is responsible for designing and implemen ng a ven la on and fire protec on system in accordance with applicable regula ons. The contrac ng...

DESCRIPTION OF THE PARKING SYSTEM STRUCTURE TO BE PROVIDED BY THE CUSTOMER: - 3-phase power supply 400 V, 50 Hz, 3p+N+PE with wire marking, - electricity meter, - overcurrent protec on 3x16A (C-type) for each hydraulic power unit, - 3-phase switch (in black and yellow) with posi on lockable by a padlock for each hydraulic power unit, - earth ground within the area of the parking pla orms (equipoten al bonding as per PN-EN 60204 from the founda on to the pla orm), - ligh ng of the parking area. AVAILABLE DOCUMENTS: User and maintenance manual, abridged user manual, declara on of conformity,...

OPTION 1 1. Each dimension related to the structure of the building where the devices are to be placed is a minimum dimension. The dimensions are given in cen metres. Tolerance of the building dimensions is cm. 2. Earthing connec ons for the pla orms are to be prepared by the investor. 3. The tables contains minimum dimensions of the required working space and the en re suppor ng structure for specific heights of the parked cars. If the distance between the ramp and ceiling of the building is greater, it is possible to park correspondingly taller cars on the upper pla orm. 4. The...

To download technical sheets and catalog in electronic version and .dwg files for each of our products, please visit our website www.moduloparking.com/en/files-to-download Photos from our projects are available at: Contact us: tel. (+48) 52 326 70 71 office@moduloparking.com www.moduloparking.com Find out more about our Modulo Parking Systems on our blog: