*myarchiexpo

Unifold

Product catalog summary

Overview: Moderco Unifold partitions are designed to enhance the flexibility of facilities by separating and controlling sites, sight, and sound. They are suitable for various environments such as meeting rooms, classrooms, and concert halls. These partitions are known for their durability, cost-effectiveness, and ease of operation.

Key Features:

Positive Stops: Prevent over-extension at hinge points, eliminating the need for spacing chains.
Rust Resistant Hinges: Made from 16-gauge steel for durability.
Balanced Frame Support: Provides intermediate trolley support to prevent frame sag.
Steel Rods: 3/16” diameter steel rods welded at each hinge for strength.
Soundliner: Fiberglass-reinforced, flame-resistant liner.
Sweep Seals: 3-ply compression strips ensure a tight seal with floors and ceilings.
Sound Insulating Steel Panels: Full-height stressed steel panels for sound insulation.
Covering Materials: Available in vinyl, woven fabrics, and carpet, all with Class A flammability ratings.

Airscape Ceiling Guard: This feature allows trapped air to escape, minimizing fabric stress and ensuring a complete sound seal when the partition is extended.

Customization: Partitions can be configured for straight or curved applications and are available in various profiles and operation modes (manual or electric).

Product Models:

Unifold 8 and 12: Basic models without Airscape Ceiling Guard, sweep seal, or sound insulation.
Unifold 37, 39, 41, 44: Advanced models with enhanced sound insulation and Airscape Ceiling Guard.

Technical Specifications:

Weight: Ranges from 2.2 to 7.0 lbs/sq.ft. depending on the model.
Maximum Height: Up to 20 feet for most models.
Noise Reduction Coefficient (NRC): Ranges from 0.70 to 0.85.

Contact Information: For more details, visit www.moderco.com or contact Moderco Inc. at their Boucherville, Québec office.

Catalog excerpts

Covering Materials: Wide selection of back-supported, vinyl fabrics, woven fabrics, and carpet.Class A flammability ratings per ASTM E84. Sweep Seals: 3-ply compression strips engage floor and ceiling onboth sides of partition. Sound Insulating SteelPanels: Stressed steelextends full height on bothsides of partition. > Positive Stops: Positive stops at hinge pointsof hinge plates prevent topand bottom over-extension, which eliminates the need for spacing chains. > Rust resistant hinges: Hinges are made of 16-gauge steel. Balanced Frame Support: Balanced suspension provides intermediate trolleysupport...

Open the catalog to page 2

When compressed, the folds in the doorextend past the Airscape lip, allowing the air to release When extended, the folds in the door remain sealed under the Airscape lip. >

Open the catalog to page 3

Unifold

Unifold

Catalog excerpts

Archived catalogs