Catalogs >
MITSUBISHI ELECTRIC >
PUMY-P R410A

PUMY-P R410A
2Pages

Catalog excerpts

PUMY-P R410A Inverter Heat Pump (12.5-22.4kW) The PUMY-P series allow up to 11 indoor units to be connected to a single outdoor unit, using the standard City Multi branch pipework system or via branch boxes and/or LEV kits to connect M Series or Mr Slim indoor units. This makes it an economic and efﬁcient answer for multi-room applications, whilst also offering space saving beneﬁts. Key Features & Beneﬁts: The condensing unit is extremely slimline which allows easy location and application of the system Connect stylish M Series wall mounted and ﬂoor mounted indoor units to the system via the LEV kit interface PAC-LV11M Connect M Series and Mr Slim indoor units via the PAC-MK-BC boxes alongside VRF indoor units to the same s

Open the catalog to page 1

PUMY-P R410A Inverter Heat Pump (12.5-22.4kW) PUMY-P OUTDOOR UNITS NUMBER OF CONNECTABLE INDOOR UNITS CAPACITY (kw) Notes: *1 Branch box - only using branch boxes (PAC-MK) on the system. Mixed - using a mix of branch boxes (PAC-MK) and City Multi indoor units on the same system. Figure in brackets - when using 2 branch boxes. *2 12.7mm (1/2”) if furthest length ≥ 60m. *3 40m max if outdoor installed below. *4 SCOP / SEER available separately in the ‘City Multi VRF Seasonal Efﬁciency’ document. Based on Ecodesign Lot 6 to EN14825 standard. NUMBER OF CONNECTABLE INDOOR UNITS COMPATIBLE INDOOR...

Open the catalog to page 2