Mitsubishi Electric modules and inverters. Just the right fit. PHOTOVOLTAIC MODULES TD Series Performance Higher Cell Efficiency 4 busbar cell Solder coatingless ■ Fine grid electrodes ■ Optimized tab thickness ■ ■ Higher Module Output Highly reflective backfilm with wide cell pitch Cerium-free high-transparency glass ■ Tight tolerance +/-3% ■ High power in actual use (Paired module average exceeds nominal value) ■ ■ Reliability Static load test of 5400Pa passed with protection bar ■ Double corrosion resistant frame coating ■ Max. system voltage 1000V with four-layer back film ■ Water drainage structure ■ Low frame edge slope ■ Flexible straight tabs ■ Best Performance with Long Reliability Safety Quad-layer protective design junction box Highly heat-resistant bypass diode ■ Lock mechanism equipped connectors ■ Conforms with IEC 61215 2nd Edition, IEC 61730 ■ Lighter weight modules at 17.0kg ■ ■ Ecological Lead-free solder modules Manufactured in a ISO14001 certified plant ■ Shipped on recyclable steel pallets ■ ■ All models made in Japan

Manufacturer Model name Cell type Number of cells Maximum power rating (Pmax) Warranted minimum Pmax Tolerance of maximum power rating Open circuit voltage (Voc) Short circuit current (Isc) Maximum power voltage (Vmp) Maximum power current (Imp) Normal operating cell temperature (NOCT) Maximum system voltage Fuse rating Dimensions Weight Output terminal Module efficiency Packing condition Certificates ELECTRICAL CHARACTERISTICS Electrical Performance (Cell temperature: 25°C) Temperature dependence of Isc, Voc and Pmax Irradiance dependence of Isc, Voc and Pmax (Cell temperature: 25°C) 140 40...