Optimum Design for Hospital Use Usability Mitsubishi Electric’s hospital bed elevators are designed to provide safe, convenient An optimum mix of features ensures efficient elevator operation to meet every hospital Safety Door Edge (SDE) (Standard) A mechanical safety device with a micro-switch reverses closing doors if there is physical contact with a passenger or an object. Extended Door-open Button Function (DKO-TB) (Standard) When the hold button on the car operating panel is pressed, the doors will remain open longer to allow safe loading and unloading of passengers, including patients in...

Walls, doors and transom panel LED lighting Milky white resin panels Ceiling Painted steel sheet Mirror-finish (Not applicable to car doors.) Y033 Pattern-printed steel sheet Painted steel sheet Design Image Ceiling Walls Transom panel Doors Front return panels Kickplate Flooring Car operating panel Handrails (standard) Painted steel sheet Y033 (ceiling height: 2200mm*2 ) Painted steel sheet Y033 Painted steel sheet Y033 Painted steel sheet Y033 SUS-HL SUS-HL PR812 CBV1-N710 SUS-HL (YH-56S) Colored stainless-steel, hairline-finish Etching patterns (Gold or bronze) *Please refer to etching finish...

Hall Design Jambs Narrow Jamb Splayed Jamb Square Jamb Splayed Jamb with Transom Panel Square Jamb with Transom Panel Metal-like resin faceplates Segment LED indicator *1 E-102 Jamb Doors Hall position indicator and call button Jamb Doors Hall position indicator Hall button Painted steel sheet Y116 Painted steel sheet Y116 PIH-D417 HBV1-C710N E-312 Jamb Transom panel Doors Hall position indicator Hall button SUS-HL SUS-HL SUS-HE (EP-B-009) PID-D417 HBV1-C710N Entrance Finishes Doors, transom panel and jamb Transom Doors panel Etching patterns Not applicable to jamb, please refer to etching finish...

For side wall Segment LED indicator *2 For front return panel (Model B1000 only) Button line-up Tactile Illumination colors Tactile button with yellow-orange lighting Tactile or flat button (stainless-steel, non-directional hairline) is selectable from three types of illumination colors. (yellow-orange, white or blue) Tactile button with yellow-orange lighting Notes: *1: Faceplates with stainless-steel, mirror-finish are also available (optional). Please consult our local agents for details. *2: Some letters of the alphabets are not available. Please consult our local agents for details. *3:...

Hall Signal Fixtures Hall position indicators and buttons * Metal-like resin faceplates Segment LED indicator *2 Hall position indicators *3 Hall buttons *1 LCD indicator Metal-like resin faceplate PIV PIV -A710B Tactile button with yellow-orange lighting Metal-like resin faceplates Segment LED indicator *2 LCD position indicator Segment LED indicator * Cross-section of boxless fixtures Boxless These hall signal fixtures can be easily mounted on the wall surface without having to cut into the wall to embed the back box. PIV -A720N *3 Boxless PIV -A720B Tactile button with yellow-orange lighting...

■ EMERGENCY OPERATIONS AND FEATURES Mitsubishi Emergency Landing Device (MELD) MelEye (WP-W) Mitsubishi Elevators & Escalators Monitoring and Control System Each elevator’s status and operation can be monitored and controlled using advanced Web-based technology which provides an interface through personal computers. Special optional features such as preparation of traffic statistics and analysis are also available. Car lighting which turns on immediately when power fails, providing a minimum level of lighting within the car. (Choice of dry-cell battery or trickle-charge battery.) Overload Holding...

■ GROUP CONTROL FEATURES Peak Traffic Control (PTC) Strategic Overall Spotting (SOHS) To reduce passenger waiting time, cars which have finished service are automatically directed to positions where they can respond to predicted hall calls as quickly as possible. Controls the number of cars to be allocated to the lobby floor, as well as the car allocation timing, in order to meet increased demand for upward travel from the lobby floor during office starting time, hotel check-in time, etc., and minimize passenger waiting time. Voice Guidance System (AAN-G) Energy-saving Operation — Number of Cars...

Basic Specifications Vertical Dimensions Maximum number of stops Rated speed (m/sec) Minimum machine room clear height (mm) Minimum floor to floor height (mm) [Terms of the table] • The contents of this table are applied only to standard specifications without counterweight safety. Please consult our local agents for other specifications. [Note] *1 Some specifications require more than 2500mm as a minimum floor height. Please consult us if the floor height is less than entrance height HH + 700mm. Hoistway Section Example Horizontal Dimensions [Terms of the table] • The contents of this table...

Important Information on Elevator Planning Work Not Included in Elevator Contract The following items are excluded from Mitsubishi Electric’s elevator installation work, and are therefore the responsibility of the building owner or general contractor: • Construction of the elevator machine room with proper beams and slabs, equipped with a lock, complete with illumination, ventilation and waterproofing. • Access to the elevator machine room sufficient to allow passage of the control panel and traction machine. • Architectural finishing of the machine room floor, and the walls and floors in the...

Eco Changes is the Mitsubishi Electric Group's environmental statement, and expresses the Group's stance on environmental management. Through a wide range of businesses, we are helping contribute to the realization of a sustainable society. MITSUBISHI ELECTRIC CORPORATION I™"—?* t. .. . HEAD OFFICE :TOKYO BLDG.. 2-7-3. MARUNOUCHI. CHIYODA-KU. TOKYO 100-8310. JAPAN http://WWW.mHSUtaShi8l8Ctnc.com/8l8Vator/ A Safety Tips: Be sure to read the instruction manual fully before using this product. responsible sources Revised publication effective Jun. 2013. Specifications are subject to change without...