MINIB, s. r. o., Støešovická 49, 162 00 Praha 6 CZ, [email protected] tel.: +420 220 180 780, +420 604 767 677 fax: +420 220 180 779 42 www.minib.cz COIL - T 50 with a fan Coil – T50 CHARACTERISTICS 6 lowest height MINIB convector with fan 6 construction height only 50 mm 6 supplied only with 12.7 mm high Al grille chaRakteristika A newly developed convector with minimal construction height of only 50 mm and a heat output up to 600 W/m of the convector. It can be placed into the final layer of the floor concrete or into a very low step of the floor. The convector body is made from aluminium alloy and forms one compact unit with the fan. COIL-T50 is equipped with MINIB 12 V DC specially-modified fan motors, which provided minimal consumption of approx. 7 W of electric energy per meter length of the convector. The convector grille is designed for walking on it and is made from aluminium. The convector body is manufactured to match the colour of the grille – either silver eloxal coating or light bronze. This convector has been supplied with connection fittings and flexible hoses “3/8” for connection of the heat exchanger since 1st May 2009. Info: This convector is newly supplied with levelling screws. DIMENSIONS total width 161 mm construction height 50 mm length L 900 to 3000 mm where: m= 0,9955 temperature exponent tW, A mean heating water temperature, mean air temperature [ºC] QN nominal heat transfer rate for difference of temperatures tw - tA = 50 ºC [W] Q heat transfer rate for other temperatures [W] TEMPERATURE EQUATION Q = Q ( ) N t m w - ta 50 CROSS SECTION OF COIL-T50 Window 35 Ø25 161 177 50 26 77 32