MINIB, s. r. o., Støešovická 49, 162 00 Praha 6 CZ, [email protected] tel.: +420 220 180 780, +420 604 767 677 fax: +420 220 180 779 50 www.minib.cz COIL - MO with a fan CHARACTERISTICS 6 very powerful MINIB floor convector 6 heating of any interior (in winter) and interior cooling (in summer) with the possibility of moisture condensation in the trough 6 heating of swimming pools 6 implied condensate outlet DIMENSIONS total width 303 mm construction height 125 mm length L 900 to 3000 mm USAGE Convector COIL – MO is used as a fast reacting heating unit suitable for heating of interiors with high heat loads. Convector COIL – MO is also suitable for use in wet spaces, where pooling of water in the trench can occur. The convector has a specially profiled base enabling draining of collected water (eventually condensed water) through the outlet pipe at the bottom of the trough. The fan operates at the safe voltage of 12V. If there is a source of chilled water (6/12 ºC) available the COIL-MO may also be used for cooling of the interior The convector will cause formation of cool air curtain by the window where it prevents room heating through convection from heated window surfaces. The cooling effect is most evident especially in the vicinity of windows so that the interior air is not fully cooled as in case of when using standard air conditioning. The convector cannot be installed to swimming pools with salt or other aggressive water. coil – mO where: m= 1,0435 temperature exponent tW, A mean heating water temperature, mean air temperature [ºC] QN nominal heat transfer rate for difference of temperatures tw - tA = 50 ºC [W] Q heat transfer rate for other temperatures [W] TEMPERATURE EQUATION Q = Q ( ) N t m w - ta 50 CROSS SECTION OF COIL-MO Window 117 65 Ø30 86 46 125 124 303 305 Ø18 140 Ø30 49 78 110 LONGITUDINAL SECTION COIL-MO