Specification Sheet 45 lb. (20kg) Capacity Rigid-Mount Washer-Extractor mechanical specificationselectrical specifications Capacity - lb (kg) See Fuse and Wire Size manual MAEFUSE1BE for safety information. ▼ See dimensional drawing for complete details. ^ It is the sole responsibility of the owner/user to assure that the floor and/or any other supporting structure exceeds not only all applicable building codes, but also that the floor and/or any other supporting structure for each washer-extractor or group of washer-extractors has sufficient strength and rigidity (i.e., a natural or resonant frequency many times greater than the rotational machine speed with a reasonable factory of safety) to support the weight of all the fully loaded machine(s) including the weight of the water and goods, and including the published 360° rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the factory for additional machine data for use by a structural engineer. ■ Machine bases made from concrete should either be of a monolithic pour or should be tied into foundation and not isolated from existing floor. ‘Specifications and appearance subject to change without notice.

45 LB. (20KG) CAPACITY RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET Standard Features:  6 speeds (2 wash, 1 distribution, 3 extract)  E-P PLUS programmable controller  Single-motor inverter drive  Tall, lifting ribs  Sealed ball bearings  High M.A.F. (Mechanical Action Factor)  Large cylinder perforations  Fresh-water flushing chemical manifold  Auto tension V-belt drive  Five (5) liquid chemical injection ports  Control reads in English/second language  5-year limited warranty on frame, cylinder & shell Optional Features:  Lint trap  Mounting base, 10” or 6” Why Purchase Milnor?...