RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET FRONT VIEW RIGHT SIDE VIEW REAR VIEW FOUNDATION VIEW ANCHORING DETAIL 152] EXPANSION BOLT WITH ROUGHEN FLOOR TO CHECK SIDEWARD MOVEMENT OF MACHINE FLOOR REQUIREMENT MINIMUM 6" See Fuse and Wire Size manual MAEFUSE1 BE for safety information. T See dimensional drawing for complete details. It is the sole responsibility of the owner/user to assure that the floor and/or any other supporting structure exceeds not only all applicable building codes, but also that the floor and/or any other supporting structure for each washer-extractor or group of washer-extractors has sufficient strength and rigidity (i.e., a natural or resonant frequency many times greater than the rotational machine speed with a reasonable factory of safety) to support the weight of all the fully loaded machine(s) including the weight of the water and goods, and including the published 3609 rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the factory for additional machine data for use by a structural engineer. "Specifications and appearance subject to change without notice.

45 LB. (20KG) CAPACITY RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET Standard Features: • 6 speeds (2 wash, 1 distribution, 3 extract) • E-P PLUS® programmable controller • Back-lit LCD display • Single-motor inverter drive • Tall, lifting ribs • Sealed ball bearings • High M.A.F. (Mechanical Action Factor) • Large cylinder perforations • Fresh-water flushing chemical manifold • Auto tension V-belt drive • Five (5) liquid chemical injection ports • Control reads in English/second language • 5-year limited warranty on frame, cylinder & shell Optional Features: • Lint trap • Mounting base, 10”...