Catalogs >
Milnor >
MWR18E4

MWR18E4
2Pages

Catalog excerpts

45 LB. (20KG) CAPACITY RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET Cold water inlet, .75” (19 mm) GHT Drain 3” (76 mm) ID hose connection Main electrical connection Anchor bolt holes, .8125” (21 mm) diameter Chemical flush, .75” (19 mm) GH connection Standard soap chute FLOOR REQUIREMENT MINIMUM 6” RECOMMENDED , ▼ MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Capacity – lbs (kg) Cylinder Diameter x Depth – ins (mm) Cylinder Volume – cu. ft. (L) Door Opening – ins (mm) Machine Dimensions (W x D x H) – ins (mm) Shipping Dimensions (W x D x H) – ins (mm) Motor – HP (kW) Wash Speed – RPM Distribution Speed – RPM Extraction Speed – RPM Extraction G-Force Voltage Running Fuse Circuit Breaker 45 (20) Amps (Amps) (Amps) 28 x 18 (711 x 457) 6.4 (80) 220/3/50 7 FRN15 15 208,240/1-3/60 9,8 FRN15 15 16 (406) 380/3/50-60 4.5 FRS8 15 34.44x47.63x52.63 (875x1209x1337) 415/3/50 4.5 FRS8 15 38 x 50 x 60 480/3/60 3.5 FRS5 15 (965 x 1270 x 524) See Fuse and Wire Size manual MAEFUSE1BE for safety information. 3 32 ▼ See dimensional drawing for complete details. 64 475 It is the sole responsibility of the owner/user to assure that the floor and/or any other supporting structure exceeds not only all applicable building codes, but also 90 that the floor and/or any other supporting structure for each washer-extractor or Static Weight – lbs (kg) Max. Dynamic Load RMS – lbs (kg) Frequency (Hz) Water Pressure (Required) – psi (bar) Water Valve CV Rating – gal/min (L/min) Minimum Recommended Distance Between Machines – ins (mm) group of washer-extractors has sufficient strength and rigidity (i.e., a natural or resonant frequency many times greater than the rotational machine speed with a reasonable factory of safety) to support the weight of all the fully loaded machine(s) including the weight of the water and goods, and including the published 360º rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the factory for additional machine data for use by a structural engineer.

Open the catalog to page 1

45 LB. (20KG) CAPACITY RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET Standard Features: • 3 speeds • E-P OneTouch® programmable controller • Single-motor inverter drive • Tall, lifting ribs • Sealed ball bearings • High M.A.F. (Mechanical Action Factor) • Large cylinder perforations • Fresh-water flushing chemical manifold • Auto tension V-belt drive • 3 liquid chemical injection ports • Control reads in English/second language • 5-year limited warranty on frame, cylinder & shell Why Purchase Milnor? • Greater cylinder perforated-area generates better wash quality, better rinsing and...

Open the catalog to page 2