*myarchiexpo

MWR12E5

Product catalog summary

Specifications:
The MWR12E5 is a rigid-mount washer-extractor with a capacity of 25 lbs (11 kg). It features a cylinder with a diameter of 23 inches and a depth of 14 inches, providing a volume of 3.37 cubic feet. The machine dimensions are 26 x 34.94 x 42.38 inches, and it requires a minimum floor thickness of 6 inches for installation. The washer operates at a wash speed of 32 RPM, distribution speed of 64 RPM, and extraction speed of 525 RPM, with an extraction G-force of 90. It requires water pressure between 10-75 psi and has a water valve CV rating of 4.6 gal/min.

Mechanical and Electrical Specifications:
The washer is compatible with various voltage configurations, including 220/3/50, 208,240/1-3/60, 380/3/50-60, 415/3/50, and 480/3/60. It features a single-motor inverter drive and requires specific fuse and circuit breaker ratings as detailed in the manual MAEFUSE1BE.

Standard Features:
The washer includes a 3-speed E-P OneTouch® programmable controller, tall lifting ribs, sealed ball bearings, and a fresh-water flushing chemical manifold. It also has three liquid chemical injection ports and a 5-year limited warranty on the frame, cylinder, and shell.

Benefits:
The washer's design promotes better wash quality, faster process times, and reduced fabric wear, leading to cost savings on dryer fuel and linen replacement. The simple push-button controls allow for four separate wash formulas, reducing operator errors and training time.

Optional Features:
Optional features include a lint trap and a mounting base of either 10 or 6 inches.

Contact Information:
For more information or to find a local dealer, contact Pellerin Milnor Corporation at their Kenner, LA office.

Catalog excerpts

25 LB. (11KG) CAPACITY RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET Cold water inlet .75” (19 mm) GHT Drain to sewer 2” (51 mm) ID hose Static Weight – lbs (kg) Max. Dynamic Load RMS – lbs (kg) Frequency (Hz) Water Pressure (Required) – psi (bar) Water Valve CV Rating – gal/min (L/min) Minimum Recommended Distance Between Machines – ins (mm) Capacity – lbs (kg) Cylinder Diameter x Depth – ins (mm) Cylinder Volume – cu. ft. (L) Door Opening – ins (mm) Machine Dimensions (W x D x H) – ins (mm) Shipping Dimensions (W x D x H) – ins (mm) Motor – HP (kW) Wash Speed – RPM Distribution Speed – RPM Extraction Speed – RPM Extraction G-Force MECHANICAL SPECIFICATIONS Anchor bolt holes .8125” (21 mm) FLOOR REQUIREMENT MINIMUM 6” RECOMMENDED , ▼ Electrical connection Liquid supply inlets Soap chute ELECTRICAL SPECIFICATIONS Running Amps Fuse (Amps) Circuit Breaker (Amps) See Fuse and Wire Size manual MAEFUSE1BE for safety information. ▼ See dimensional drawing for complete details. It is the sole responsibility of the owner/user to assure that the floor and/or any other supporting structure exceeds not only all applicable building codes, but also that the floor and/or any other supporting structure for each washer-extractor or group of washer-extractors has sufficient strength and rigidity (i.e., a natural or resonant frequency many times greater than the rotational machine speed with a reasonable factory of safety) to support the weight of all the fully loaded machine(s) including the weight of the water and goods, and including the published 360º rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the factory for additional machine data for use by a structural engineer.

Open the catalog to page 1

25 LB. (11KG) CAPACITY RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET Standard Features: • 3 speeds • E-P OneTouch® programmable controller • Single-motor inverter drive • Tall, lifting ribs • Sealed ball bearings • High M.A.F. (Mechanical Action Factor) • Large cylinder perforations • Fresh-water flushing chemical manifold • Auto tension V-belt drive • Three (3) liquid chemical injection ports • Control reads in English/second language • 5-year limited warranty on frame, cylinder & shell Optional Features: • Lint trap • Mounting base, 10” or 6” Why Purchase Milnor? • Greater cylinder perforated-area...

Open the catalog to page 2

MWR12E5

MWR12E5

Catalog excerpts

All Milnor catalogs and technical brochures

Archived catalogs