Mildata® Computer Management System
4Pages

{{requestButtons}}

Catalog excerpts

Mildata® Computer Management System - 2

The right sizes These dryers can be used with washer-extractors or with tunnel washers. Basket volumes available are 45.5 cu. ft. (1287 L), 108 cu. ft. (3058 L) and 170 cu. ft. (4800 L). They’re ideal for loads ranging from 110 lbs. (50 kg) to 550 lbs. (250 kg). Why they save time and energy • Goods circulate freely – as they dry, they move to the upper end; 45.5 – 170 cu. ft. (1287 – 4800 L) cylinder enhances movement of hot air through the load. • Huge open area – with about 65% of the perforated side sheet open, hot air flows easily through the basket. • Patented long-life seal – keeps...

Open the catalog to page 2
Mildata® Computer Management System - 3

Si. THROUGH Control provides efficiency, information Microprocessor control allows field-programming of dry formulas. Up to 32 dry codes can be programmed, accommodating both full and small loads for 16 different goods types. Inlet and outlet temperatures may be programmed to optimize drying times. Modulating gas valve can maintain an inlet or outlet temperature within one percent of the set point (does not rely on a high fire-low fire scheme). Similar modulating temperature control is also available on steam models (optional extra). The control provides cooldown, self-diagnostics, plus...

Open the catalog to page 3
Mildata® Computer Management System - 4

Capacity depends on type of goods -- e.g., ranging from various fabrics/cotton goods to mats or wipers. Specifications and appearance subject to change without notice. Contact factory for acoustics data. *With standard accessories. Pellerin Milnor Corporation P. O. Box 400, Kenner, LA 70063-0400 USA 504/712-7656 • 800/469-8780 Fax: 504/468-3094 E-mail: mktg@milnor.com www.milnor.com Printed in U.S.A. © Pellerin Milnor Corporation Class 5-1 Brochure B22SL07001/07055 specifications PASS-THROUGH DRYERS 500 40 640 58 720 72 Capacity range - lbs. (kg) 110 (50) 200-320 (91-145) 400-550 (180-250)...

Open the catalog to page 4

All Milnor catalogs and technical brochures

  1. 60044WR2

    2 Pages

  2. MWT18J6

    2 Pages

  3. MWT16J5

    2 Pages

  4. M35EDC

    2 Pages

  5. M50EDC

    2 Pages

  6. M76EDC

    2 Pages

  7. M78C

    2 Pages

  8. M115C

    2 Pages

  9. 30015VZZ

    2 Pages

  10. MWR18J6

    2 Pages

  11. MWR18X4

    2 Pages

  12. 30022T6X

    2 Pages

  13. 30022V8Z

    2 Pages

  14. 30022VRJ

    2 Pages

  15. 30022VZZ

    2 Pages

  16. MWR27E5

    2 Pages

  17. MWR27J5

    2 Pages

  18. MWR27X5

    2 Pages

  19. 36021V5Z

    2 Pages

  20. 36021V7Z

    2 Pages

  21. 36026V5Z

    2 Pages

  22. 36026V7Z

    2 Pages

  23. 42026V6Z

    2 Pages

  24. 42030V6Z

    2 Pages

  25. M190

    2 Pages

  26. M202

    2 Pages

  27. M122

    2 Pages

  28. M333

    2 Pages

  29. M758C

    2 Pages

  30. M50C

    2 Pages

  31. M333C

    2 Pages

  32. M330C

    2 Pages

  33. M3030EDC

    2 Pages

  34. Corporate

    16 Pages

  35. MWR18E4

    2 Pages

  36. MWR12E5

    2 Pages

  37. M78

    2 Pages

  38. M30C

    2 Pages

  39. 30022 V8Z

    2 Pages

  40. M200 DRYER

    2 Pages

  41. 72044 WP2

    2 Pages

  42. 42044 SP2

    2 Pages

  43. Mildata

    4 Pages

Archived catalogs

  1. 68036 F5N

    4 Pages

  2. 48040 F7J

    2 Pages

  3. 30022 X8J

    4 Pages

  4. MWR12E5

    4 Pages

  5. high speed

    2 Pages

  6. 30015 V7J

    4 Pages

  7. 30015 T5E

    4 Pages