220 LB. (100KG) CAPACITY DIVIDED-CYLINDER WASHER-EXTRACTOR SPECIFICATION SHEET Compressed air inlet connection .25” (6 mm) NPT Cold water inlet 1.5” (38 mm) NPT Drain valve 8” (203 mm) diameter Electrical connection Anchor bolt holes 1.06” (27 mm) MECHANICAL SPECIFICATIONS Static Weight – lbs (kg) Max. Dynamic Load RMS - lbs (kg) Frequency (Hz) Water Pressure (Required) – psi (bar) Water Valve Cv Rating – gal/min (L/min) Soap chute Capacity – lbs (kg) Cylinder Diameter x Depth – ins (mm) Cylinder Door Area – sq. in (sq. cm) Cylinder Volume – cu. ft. (L) Machine Dimensions (W x D x H) – ins (mm) Shipping Dimensions (W x D x H) – ins (mm) Motor – HP (kW) Wash Speed – RPM Distribution Speed – RPM Extraction Speeds – RPM Extraction G-Force Hot water inlet 1.5” (38 mm) GHT Peristaltic supply connection .5” (13 mm) NPT Steam inlet connection 1.25” (32 mm) NPT ELECTRICAL SPECIFICATIONS Running Amps Fuse (Amps) Circuit Breaker (Amps) 208/3/60 24 FRN50 100 220/3/50-60 23 FRN50 90 240/3/60 21 FRN45 80 380/3/50-60 13 FRS30 60 400/3/50 12.5 FRS30 50 415/3/50 12 FRS25 50 See Fuse and Wire Size manual MAEFUSE1BE for safety information. 480/3/60 10.5 FRS25 40 600/3/60 8.5 FRS20 35 See Fuse and Wire Size manual MAEFUSE1BE for safety information. ▼ See dimensional drawing for complete details. It is the sole responsibility of the owner/user to assure that the floor and/or any other supporting structure exceeds not only all applicable building codes, but also that the floor and/or any other supporting structure for each washer-extractor or group of washer-extractors has sufficient strength and rigidity (i.e., a natural or resonant frequency many times greater than the rotational machine speed with a reasonable factory of safety) to support the weight of all the fully loaded machine(s) including the weight of the water and goods, and including the published 360º rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the factory for additional machine data for use by a structural engineer.

245 LB. (111KG) CAPACITY DIVIDED-CYLINDER WASHER-EXTRACTOR SPECIFICATION SHEET Standard Features: • Split pocket cylinder • AUTOSPOT™ cylinder positioner • MarkVI programmable controller • Color graphic display • Single-motor inverter drive • Air-operated valves • Programmable overnight bath soak • Programmable water temperature for each bath • Hydro-Cushion™ suspension • Spherical roller bearings • Large cylinder perforations • Twenty (20) liquid chemical injection ports • Control reads in English/second language • 5-year limited warranty on frame, cylinder & shell Optional Features: • 5 compartment...