60044 WR2 450 LB. (204KG) CAPACITY DIVIDED-CYLINDER WASHER-EXTRACTOR SPECIFICATION SHEET MECHANICAL SPECIFICATIONS Compressed air inlet connection .25” (6 mm) NPT Cold water inlet 2” (51 mm) NPT Drain valve 8” (203 mm) diameter Electrical connection Anchor bolt holes 1.06” (27 mm) Peristaltic supply connection Soap chute Steam inlet connection 1.25” (32 mm) NPT ELECTRICAL SPECIFICATIONS Capacity – lb (kg) Cylinder Diameter x Depth – ins (mm) Cylinder Door Area – sq. in. (sq. cm) Cylinder Volume – cu. ft. (L) Machine Dimensions (W x D x H) – in (mm) Shipping Dimensions (W x D x H) – in (mm) Motor – HP (kW) Wash Speed – RPM Distribution Speed – RPM Extraction Speeds – RPM Extraction G-Force Static Weight – lb (kg) * Max. Dynamic Load RMS - lb (kg) * Frequency (Hz)* Water Pressure (Required) – psi (bar) Water Valve Cv Rating at 72°F (22°C) *Contact factory for WR3 details. B22SS10039/23262 Page 1 of 2 other supporting structure exceeds not only all applicable building codes, but also that the floor and/or any other supporting structure for each washer-extractor or group of washer-extractors has sufficient strength and rigidity (i.e., a natural or resonant frequency many times greater than the rotational machine speed with a reasonable factory of safety) to support the weight of all the fully loaded machine(s) including the weight of the water and goods, and including the published 360º rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the factory for additional ma

60044 WR2 450 LB. (204KG) CAPACITY DIVIDED-CYLINDER WASHER-EXTRACTOR SPECIFICATION SHEET Standard Features:  Rapid Load split pocket cylinder  AUTOSPOT™ cylinder positioner  MilTouch-EX™ programmable controller  Full-color touch screen  Single-motor inverter drive  Air-operated valves  Programmable overnight bath soak  Programmable water temperature for each bath  Programmable Air-Operated steam injection  Hydro-Cushion™ suspension  Spherical roller bearings  Large cylinder perforations  Twenty (20) liquid chemical injection ports  Control reads in English/second language Optional...