Catalog excerpts
RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET FRONT VIEW RIGHT SIDE VIEW REAR VIEW FOUNDATION VIEW ANCHORING DETAIL EXPANSION BOLT WITH 5/8° [16] _II_ ROUGHEN FLOOR TO CHECK SIDEWARD MOVEMENT OF MACHINE MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Cylinder Diameter x Depth - in. (mm) Circuit Breaker Machine Dimensions Shipping Dimensions See Fuse and Wire Size manual MAEFUSE1BE for safety information. Contact factory for electrical specifications if equipped with Electric Heat option. T See dimensional drawing for complete details. Extraction G-Force Water Pressure <Rei"M> - psi (bar) ^_ It is the sole responsibility of the owner/user to assure that the floor and/or any other supporting structure exceeds not only all applicable building codes, but also that the floor and/or any other supporting structure for each washer-extractor or group of washer-extractors has sufficient strength and rigidity (i.e., a natural or resonant frequency many times greater than the rotational machine speed with a reasonable factory of safety) to support the weight of all the fully loaded machine(s) including the weight of the water and goods, and including the published 3609 rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the factory for additional machine data for use by a structural engineer. Water Valve Cv Rating - gal/min (L/min) Minimum Recommended Distance "Specifications and appearance subject to change without notice.
Open the catalog to page 160 LB. (27KG) CAPACITY RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET Standard Features: RinSave® water saving technology 7 speeds (2 wash, 1 distribution, 1 RinSave, 3 extract) E-P PLUS programmable controller Back-lit LCD display Single-motor inverter drive Tall, lifting ribs Tapered roller bearings High M.A.F. (Mechanical Action Factor) Large cylinder perforations Fresh-water flushing chemical manifold Auto tension V-belt drive Six (6) liquid chemical injection ports Control reads in English/second language 5-year limited warranty on frame, cylinder & shell...
Open the catalog to page 2All Milnor catalogs and technical brochures
-
60044WR2
2 Pages
-
industrial-dryers
2 Pages
-
gear-guardian-drying-cabinet
2 Pages
-
mwf-series-small-capacity
4 Pages
-
m30-175-dryers
4 Pages
-
corporate-brochure
16 Pages
-
ECODRY 35-75 LB. DRYERS
4 Pages
-
MWT18J6
2 Pages
-
MWT16J5
2 Pages
-
20-80 lb. VENDED WASHERS
2 Pages
-
M35EDC
2 Pages
-
M50EDC
2 Pages
-
M76EDC
2 Pages
-
M78C
2 Pages
-
M115C
2 Pages
-
30015VZZ
2 Pages
-
MWR18J6
2 Pages
-
MWR18X4
2 Pages
-
30022T6X
2 Pages
-
30022V8Z
2 Pages
-
30022VZZ
2 Pages
-
MWR27E5
2 Pages
-
MWR27J5
2 Pages
-
MWR27X5
2 Pages
-
36021V5Z
2 Pages
-
36021V7Z
2 Pages
-
36026V5Z
2 Pages
-
36026V7Z
2 Pages
-
42026V6Z
2 Pages
-
42030V6Z
2 Pages
-
M190
2 Pages
-
M202
2 Pages
-
M122
2 Pages
-
M333
2 Pages
-
CBW® Batch Washers
4 Pages
-
M758C
2 Pages
-
M50C
2 Pages
-
M333C
2 Pages
-
M330C
2 Pages
-
M3030EDC
2 Pages
-
Corporate
16 Pages
-
MWR18E4
2 Pages
-
MWR12E5
2 Pages
-
M78
2 Pages
-
M30C
2 Pages
-
30022 V8Z
2 Pages
-
Pass-through dryers
4 Pages
-
M200 DRYER
2 Pages
-
30-190 LB. DRYERS
4 Pages
-
EcoDry 30-75 LB. DRY ERS
4 Pages
-
40-60lb Washer-Extractors
4 Pages
-
72044 WP2
2 Pages
-
42044 SP2
2 Pages
-
Centrifugal Extractors
2 Pages
-
CBW PulseFlow Batch Washers
34 Pages
-
Single Stage Press Brochure
4 Pages
-
MWR Series Washer-Extractors
4 Pages
-
Mildata
4 Pages
-
20-60 lb. Vended Washer
2 Pages
-
30-190 lb Dryer
4 Pages
-
Gear Guardian Drying Cabinet
2 Pages
-
Coin-Operated Dryers
2 Pages
-
V-Series Washer-Extractors
4 Pages
Archived catalogs
-
64058 Pass-Through Dryers
4 Pages
-
76028 CBW® Tunnel Washer
16 Pages
-
76032 CBW® Tunnel Washer
16 Pages
-
68036 F5N
4 Pages
-
48040 F7J
2 Pages
-
30022 X8J
4 Pages
-
MWR12E5
4 Pages
-
high speed
2 Pages
-
30015 V7J
4 Pages
-
30015 T5E
4 Pages