60 LB. (27KG) CAPACITY RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET Cold water inlet, .75” (19 mm) GHT Drain to sewer, 3” pipe connection Electrical connection Foundation pads Hot water (chemical flushing), .75” (19 mm) GHT Standard soap chute Liquid supply inlets FLOOR REQUIREMENT 12” MINIMUM RECOMMENDED ▼,  MECHANICAL SPECIFICATIONS Capacity – lb. (kg) Cylinder Diameter x Depth – in. (mm) Door Opening – in. (mm) Cylinder Volume – cu. ft. (L) Machine Dimensions (W x D x H) – in. (mm) Shipping Dimensions (W x D x H) – in. (mm) Motor – HP (kW) Wash Speeds – RPM Distribution Speed – RPM Extraction Speeds – RPM Extraction G-Force Static Weight – lb. (kg)  Max. Dynamic Load RMS – lb. (kg)  Frequency (Hz) Water Pressure (Required) – psi (bar) Water Valve Cv Rating – gal/min (L/min) Minimum Recommended Distance Between Machines – in. (mm) ELECTRICAL SPECIFICATIONS Running Amps Fuse (Amps) Circuit Breaker (Amps) See Fuse and Wire Size manual MAEFUSE1BE for safety information. Contact factory for electrical specifications if equipped with Electric Heat option. ▼ See dimensional drawing for complete details. It is the sole responsibility of the owner/user to assure that the floor and/or any  other supporting structure exceeds not only all applicable building codes, but also that the floor and/or any other supporting structure for each washer-extractor or group of washer-extractors has sufficient strength and rigidity (i.e., a natural or resonant frequency many times greater than the rotational machine speed with a reasonable factory of safety) to support the weight of all the fully loaded machine(s) including the weight of the water and goods, and including the published 360º rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the factory for additio

60 LB. (27KG) CAPACITY RIGID-MOUNT WASHER-EXTRACTOR SPECIFICATION SHEET Standard Features:  RinSave® water saving technology  7 speeds (2 wash, 1 distribution, 1 RinSave, 3 extract)  MilTouch touch screen controller  Single-motor inverter drive  Tall, lifting ribs  Tapered roller bearings  High M.A.F. (Mechanical Action Factor)  Large cylinder perforations  Fresh-water flushing chemical manifold  Auto tension V-belt drive  Six (6) liquid chemical injection ports  Control is configurable to display your choice of language  5-year limited warranty on frame, cylinder & shell Optional...