cad

TIROIR
8Pages

{{requestButtons}}

Catalog excerpts

TIROIR - 1

MILLS TIROIR Manually operated unloading platform... Mills provides you with solutions NT 013 - NOV 18

Open the catalog to page 1
TIROIR - 2

MILLS TIROIR: manually operated unloading platform... The Mills Tiroir is a manually operated unloading platform. t can be positioned easily by crane between the floor and ceiling slabs of a floor that has already been made safe. It is fixed in place with four jack posts or by anchoring it to the floor slab. When retracted, it does not hinder crane access to the ground below. When extended, it can even be accessed below walkways. When several Mills Tiroirs are installed one above the other, materials can be delivered to a lower level by retracting all the higher platforms. Its load-bearing...

Open the catalog to page 2
TIROIR - 3

Approach ramp Using the Mills Tiroir in the operational phase. > Open and close the Mills Tiroir as needed. Packages can be moved with a pallet truck thanks to the ramp. When installing it with jack posts, the height between the 2 slabs must be at least 2m45. > Unlock the Mills Tiroir then extend it manually, lock it again and engage the latches. Do likewise for the guardrails. Lower the ramp using the pedal. To retract the Mills Tiroir, do the above in reverse order. ent sécurisée... safe surface... ...pressurizing the 4 jack posts... ...uncoupling the crane's chains and opening the rear...

Open the catalog to page 3
TIROIR - 4

> 1 - Transport up to 5 stacked “Mills Tiroir”. > 3 - Raise the Mills Tiroir in the open position, once the 2 bolts are engaged. > 4 - Place the Mills Tiroir between 2 slabs. The surface must first be made safe. > 5 - Extend the 4 jack posts to apply pressure to the slabs. Assemble the bars linking the jack posts then unhook the crane's 4 lifting chains and raise the rear ledgers. > 2 - Fit the guardrails and the jack posts. This can be done at the depot before delivery to point of use. Go to www.mills.fr for details on this step > 6 - Unlock the Mills Tiroir then retract it manually and...

Open the catalog to page 4
TIROIR - 5

Offset between “Mills Tiroir” - Platform anchored to the slab NB: Open and close the Mills Tiroir without a load. NB: Check the stress that is transfered to the slab. Additional load-bearing capacity of 2 or 5 tonnes at mid-span. *Total gross load including the weight of the package, the personnel and their equipment. Vertical static loads centred on the platform. Support reactions presumed to be rigid. If the Mills Tiroir does not abut against the slab, the admissible load will be reduced. In that case, contact our design and engineering department. “Safety first on your work sites MILLS...

Open the catalog to page 5
TIROIR - 6

Mills Tiroir: retractable unloading platform. Touréchelle: High-performing and safe. Tourétai: Speed and simplicity. Hexagonal Escalib MDS: for work sites without a crane. Mills Acram: category 2 safe erection scaffolding. Unloading platform: delivered "ready to use". 6 The Mills Plato MDS: Category 1 scaffolding (with aluminium-wood decking). M A N U A L LY

Open the catalog to page 6
TIROIR - 7

Escalib Mills MDS: site spiral staircase with side access. Mills Pano: facilitates formwork. Touréchaf: new generation of integrated safety tower. Mills Tour: the benchmark. The Work site Staircase: to go up and down safely. Public access staircase: for temporary access.

Open the catalog to page 7
TIROIR - 8

Bordeaux - ZA des Cantines - 486, allée des Cantines - 33127 SAINT-JEAN-D’ILLAC - France - Phone +33 556 68 85 85 - Fax +33 556 68 85 86 Dunkerque - ZA de le Poudrière - Route de l’Ouvrage Ouest - 59140 DUNKERQUE - France - Phone +33 328 24 24 10 - Fax +33 328 24 22 77 Le Havre - ZI de Port Jérôme - Route de Seine - 76170 LILLEBONNE - France - Phone +33 235 390 245 - Fax +33 235 39 03 99 Lyon - 161, avenue Gabriel Péri - 69 120 VAULX-EN-VELIN - France- Phone +33 478 808 825 - Fax +33 472 045 663 Marseille - ZI des Estroublans - 22, avenue de Rome - 13127 VITROLLES - France - Phone +33 442...

Open the catalog to page 8

All MILLS catalogs and technical brochures

  1. FP075

    1 Pages

  2. Escalib Mills

    16 Pages

  3. Mills Tour

    28 Pages

  4. Tourechaf

    32 Pages