Catalogs >
Milliken Contract >
OBEX™ Bar

OBEX™ Bar
9Pages

Catalog excerpts

OBEX™ Bars are designed with a unique aluminium click-in system for simple installation directly on premises. Bars can be cut to fit any application—whether surface mounted on the floor or installed in recessed mat wells. Bars feature our Cut textile or Monofilament inserts with added backing for built-in sound insulation. ZONE 1 | ZONE 2 MATERIALS

Open the catalog to page 2

Dark Grey Dark Blue

Open the catalog to page 3

Z1: Half Bar / Mono / Dark Grey Z2: Tile / Cut / Galaxy / Dark Grey Z3: Mat / Cut / Galaxy / Dark Grey OBEX™ Mono | Half Bar | Z1, Z2 Dark Grey Dark Blue

Open the catalog to page 4

Performance Made Simple OBEX™ Bars feature a patented click-in profile system, making on-site installation simple. High quality aluminium material combined with 69 mm OBEX Cut or OBEX Mono inserts deliver superior scraping action, while the foam backing maximises noise reduction from foot and rolled traffic. INDIVIDUAL PROFILE INSTALLATION AND CLEANING MADE EASY OBEX™ Bars are easy to install in a recessed mat well or surface mounted. Simple tools such as an electric handsaw can be used if adjustments on-site are required. SURFACE MOUNTED For surface mounted installations, OBEX Bars feature...

Open the catalog to page 5

Covering the Zones Protection from the Outside In To determine the most effective OBEX™ solution, our team evaluates your building’s entry based on three distinct Zones. This process starts at the outside of the building, and addresses the entire pathway through any airlocks, vestibules, and lobby or reception areas. Because every facility is unique, breaking down these Zones helps define where entrance flooring should be installed, as well as what combinations of Forms and Materials will deliver the best protection and performance. ZONE 1 | OUTDOORS Location: Outdoor area prior to...

Open the catalog to page 6

Introducing Our Variable Installation Approach (VIA) means you don’t have to settle for generic, one-size-fits-all entrance flooring. OBEX™ VIA is our site-specific analysis that starts with an assessment of your facility’s unique environment, specific needs, and challenges. We then match your requirements with our offering of effective Forms and industry-proven Materials. Finally, VIA focuses the conversation on your preferences, resulting in a tailored entrance flooring system that delivers both performance and protection. Objective – What do you need your entry to do? Factor in variables...

Open the catalog to page 7

Quick Reference Guide OBEX™ Half Bar / Mono Bar Material Extruded Aluminium Profile with Foam Base Layer Bar Material Extruded Aluminium Profile with Foam Base Layer Nominal Total Thickness 11 mm 16 mm Nominal Total Thickness 11 mm 16 mm 22 mm Textile Yarn Type ECONYL® Monofilament Textile Yarn Type ECONYL® Monofilament Textile Dye Method Solution Dyed Nominal Total Weight 11 mm: 8,295 g/m2 16 mm: 11,595 g/m2 Textile Dye Method Solution Dyed Nominal Total Weight 11 mm: 9,800 g/m2 16 mm: 12,800g/m2 22 mm: 15,000 g/m2 Zone Application Bar - Cut 16mm Half Bar - Mono 11mm Half Bar - Mono 16mm...

Open the catalog to page 8

Milliken’s integrated OBEX™ system of Forms and Materials optimises safety, wellness, and design from the outside in. Augmented Reality Product Catalog Project Management Customer Service –Europe: +44 1942612999 © 2019 Milliken & Company

Open the catalog to page 9

OBEX™ Bar 9Pages

Catalog excerpts

All Milliken Contract catalogs and technical brochures

OBEX™ Bar
9Pages