MEVA FormSe
20Pages

MEVA FormSet System-independent accessories

Box out solutions made simple Box out corner Easier working, lower labour costs MEVA's box out solutions offer the unbeatable advantages of easy andling h coupled with high speed and precision during formwork assembly and stripping. In next to no time, four box out corners can be fitted as a box out set. D ifferent plywood lengths allow flexible use. The attachment of chamfer strips to the formwork is recommended for the best possible results. The entire box out is opened and closed by operating the four box out corners with the captive MEVA wedges – already a familiar feature of the...

MEVA box out corners can accommodate everything from small door spindles to large EuMax props. The box out lengths and widths are a function of the plywood lengths. Standard wall thicknesses of 20, 24, 25 and 30 cm are available - other wall thicknesses can be supplied upon request. Even the use of alkus all-plastic form facings is possible. Simply smart ^ Fast and straightforward ^ Reusable ^ Saves time, money and materials ^ Formwork assembly and stripping in next to no time ^ Incorrect measurements impossible, foolproof assembly ^ Easy to use Door spindle MFS 700 - 1100 Door spindle MFS...

Smart anchoring Anchor solutions MEVA's intelligent and wide-ranging anchor s olutions for single- and double-sided ssemblies a ensure fast, straightforward and reliable a ttachment of panels, tie rods and MEVA stop-ends. These anchor solutions offer easy handling and versatile use, among other things, for the ollowing applications: f -- Ground slabs where support frames are used (single and double anchors plus anchor supports) -- Attachment of panels (spiral anchors) -- Attachment of brace brackets (double-headed soil nail 25/480) -- Extension of cast-in anchoring (coupling nut) --...

Remover for soil nail Nailable connector Fair-faced concrete plug Made from red plastic, the nailable connector The fair-faced concrete plug DW 15 is used for fair-faced concrete DW 15 is used to to seal the nailable connector for fair-faced attach anchor sleeves DW 15 to the facing. concrete. It is glued in with concrete glue A + B. Products Type_ Single anchor DW 15 Single anchor DW 20 Single anchor DW 26.5 Double anchor DW 15 Double anchor DW 20 Spiral anchor DW 15/100 Anchor sleeve DW 15 Anchor sleeve DW 20 Nailable connector DW 15 Plug 18 Plug 22 Plug 26.5 Fix anchor DW 15 Fix anchor...

Smart anchoring Quick anchor DW 15 Reliable, durable, reusable The quick anchor DW 15 is suitable for both ground and suspended slabs. It is ideal for installing safe anchorings with the flange screw 18 or tie rod DW 15 for braces, shoes for safety mesh, single-sided propping and a wide range of other uses. The quick anchor DW 15 (SW 17) can be extracted together with the anchor plate by means of a power screwdriver or ratchet and reused for the next concrete pour. As the spiral spring remains in the concrete, all that is required for the next operation is simply to place a new spiral...

45° Diagonal pull anchor Simply smart ^ Reusable ^ No screw anchors needed ^ Quick-anchor holder allows exact positioning of anchor and attachment to reinforcement Products Type_ Quick anchor DW 15 anchor plate 29-922-73 Quick anchor fixture DW 15 29-922-75 Vperm [kN] Minimum concrete strength fck [N/mm2] 10 - 15 - 20 - 25 - 30 -

No waiting times – lower costs Tie rod fixture Always in the right place The MEVA tie rod fixture allows the reliable attachment of two tie rods DW with articulated flange nuts, XT tie rods DW 20 or XT taper ties 20 to wall formwork panels so that they are in exactly the right place and ready for use whenever they are needed. The tie rod fixture attaches easily and conveniently to the multi-function profile. When moving formwork, there are no waiting times for accessories or small parts boxes. Permanently reusable for all MEVA wall formwork systems: -- AluFix -- EcoAs -- AluStar -- StarTec...

The integral pin allows fast, straightforward attachment of the tie rod fixture to the multi-function profile of the h orizontal or vertical wall formwork unit. An automatic anti-disengagement device ensures that the tie rods always remain in the correct position, even when the formwork is moved. Simply smart ÆÆ Shorter delays while gathering together components ÆÆ Less back-and-forward transportation on site ÆÆ Two tie rods accommodated ÆÆ Fast, straightforward attachment to multi-function profile without tools Product Type Tie rod fixture

Stop-end systems MEVA offers intelligent stop-end solutions for all slab edge and slab cantilever details encountered on site. Brace brackets – safe even on sloped slabs The easy-to-use brace brackets are available in two sizes. The brace bracket SK 80 allows the formation of stop-ends up to a height of 80 cm. The brace bracket SK 150 is used for ground slab stop-ends with a thickness of up to 150 cm. Both models allow continuous adjustment for inclinations of up to 15°, making them suitable for use on sloped slabs. The brackets can be folded up for space-efficient storage and easy...

Simply smart ^ All-in-one solution ^ Convenient accessories ^ Easy handling ^ Absolute reliability ^ Stop-end bracket and stop-end rail combinable with guard-railing post and safety mesh ^ Safe and easy-to-use Stop-end bracket for slab cantilevers Stop-end brackets simplify and speed up the construction of cantilever slabs up to 40 cm thick with a cantilever length of 50 cm. The brackets allow continuous height adjustment to ensure reliable positioning of the stop-end form. The slab edges are then formed with MEVA formwork panels, 3S plywood, alkus facings (see above) or planks. Stop-end...

Safety first Tilting support Efficient, lightweight fall protection MEVA's robust tilting supports allow cost-effective mounting of fall protection safeguards on the opposite formwork in cases where working scaffolds are only installed on a single formwork side. For crane installation and to widen access for concreting, the guard railing can be tilted outwards by up to 15°. The tilting supports can be attached to horizontal and vertical wall formwork panels and are easily locked in position with the integral horizontal wedge. Safe and stable The permissible span of the safety mesh is 2.50 m...