Mammut XT - The flexible wall formwork system
16Pages

Mammut XT The flexible wall formwork system

Variable tying with minimal effort Large-area formwork has never been this flexible and easy to use Mammut is the high-performance, economical solution for modular large-scale construction. With the new Mammut XT system MEVA is s etting new standards and thus continuing its success story in the field of 100 kN/m² formwork. As a convincing solution on construction sites Mammut XT maximises cost effectiveness. Mammut XT – the formwork for building construction and civil engineering. I am convinced by tangible arguments: 30% less formwork time and significantly fewer components – this offers...

Simply smart Æ Size - Up to 8.75 m² contact area per panel (350 x 250 cm) - For storey heights up to 350 cm without vertical extension Select between three tying methods with a flick of the wrist Integrated combination tie hole Æ Capacity - Permissible fresh concrete pressure (to DIN 18218) over entire surface of 100 kN/m² (DIN 18202, Tab. 3, Line 7) Firmly attachable tie rod holder Can be attached anywhere in the system Æ Universal application in industrial construction and civil engineering Æ Closed steel profile - Structurally robust - Torsion-proof - Hot-dip galvanised to facilitate...

Enabled by the variable combination tie hole One system – 3 tying methods Single-sided tying with XT taper tie 20 Choose the best tying method! Every construction site is unique, and the formwork requirements vary from project to project. Mammut XT creates an ideal basis for this as the system ensures that you remain flexible and well equipped for every task. Thanks to the smart combination tie hole, it is possible to select between three tying methods with a flick of the wrist. Every panel can be used for both initial and final formwork without additional assembly work. This saves times...

Single-sided tying with XT tie rod DW 20 and plastic tube Two-sided tying with tie rod DW 20 and plastic tube Combination tie hole on the final formwork side Combination tie hole on the initial formwork side Combination tie hole on the final formwork side Combination tie hole on the initial formwork side

Completely integrated The smart combination Mammut XT tie hole Ties with tapered anchor sleeves or DW 20 threads – the combination tie hole makes them possible. Combination tie hole in thread position By using an internal body that can be positioned as required with the XT combi-lever, the tying method can be changed easily with a flick of the wrist. The combination tie hole is integrated into the frame, e nsuring that no parts protrude. No installation and removal are required. Combination tie hole in anchor sleeve position

Small tool – huge impact The XT combi-lever The XT combi-lever is a universal f ormwork tool fitted with a karabiner that can be attached anywhere. Depending on the tying method, the XT combi-lever can be used in a wide variety of ways, e.g. - To set the tying method in the combination tie hole - To remove the XT sealing cone from the wall formwork panel

Flange screw Single component for strong connection of all accessories A wall full of ideas Typical Mammut – in every detail As a result of systematic development work, Mammut XT sets new standards for simple and flexible large-scale formwork assembly. MEVA technology is a convincing solution - both as an overall system and in all its details. - Securing options: all cross stiffeners are multi-function profiles - Combinable with all MEVA accessories Multi-function profile Made from closed hollow steel profiles with welded-in DW 15 nuts for rapid, structurally continuous connection of...

Sealing cone XT sealing cone for initial and final formwork when tying from one side. Tie rod fixture can be attached to the multi-function profile of the vertical or horizontal Mammut XT panel – for safe and rapid transport on the construction site. Assembly lock holder The MEVA assembly lock holders are integrated into the cross stiffeners of the Mammut XT panels with a width of 250 cm and 125 cm. This simplifies the construction site logistics. Sealing plugs available in three versions to close off unused tie holes in the XT panel. alkus all-plastic facing T he alkus formwork facing does...

Optimally combined for single-sided tying Wall thicknesses from 15 to 45 cm The XT taper tie 20 is available in various lengths for different wall thicknesses: The XT tie rod DW 20 is available in two lengths and can be used for all wall thicknesses. - 0–40 cm - 0–85 cm The wall thickness is determined by the length of the plastic tube. The wall thicknesses are adjusted in 1 cm steps using spacers. The desired wall thickness can be read off the spacers. Integrated XT articulated flange nut Plastic tubes D23 are available in the corresponding lengths for wall thicknesses of 20, 25, 30 and 35...

Schrägstellung XT-Konusanker StarTec XT H= 270 cm Inclined panels The clever XT combination tie hole and the XT taper tie enable a panel with an angle of inclination up to 4° to be tied simply and quickly. They can also compensate for angular misalignments up to 4° between adjacent and height-extended panels. Cost-effective all-in system Modular safety The safety system with a working platform is easy to install using a single component – the flange screw. A loadbearing capactiy of up to 200 kg/m² guarantees start-to-finish safety throughout the assembly and concreting operations.

Always symmetrical Uniform tie hole and joint pattern The Mammut XT panel dimensions and symmetrical internal tie holes result in a uniform tie hole and joint pattern for the highest architectural- oncrete c requirements. This applies to vertical, horizontal or a combination of vertical and horizontal formwork.

Perfectly coordinated Only 3 outside corners and 2 inside corners Optimum size matrix Simple forming of corners Vertical, horizontal – perfect! All Mammut XT panels can be combined vertically or horizontally, or height-extended. The ability to freely combine all panels ertically v or orizontally allows for economical width and height extension in h i ncrements of 25 cm. Filler areas can also be formed quickly and easily using compensation panels. With only three outside corners (side lengths 0, 10 and 15 cm) and two inside corners (side lengths 35 and 40 cm), corners can be formed quickly...