Group: Metsäliitto
Catalog excerpts
Birch PlyTop Metsa Wood Birch Ply Top is a phenolic film overlaid birch plywood panel with a raised pattern. High visual quality and wear-resistant surface makes Top multipurpose plywood flooring panel. APPLICATIONS Metsa Wood Top is an ideal panel for applications that require high quality visual and wear resistant surface: • Transport industry: Vehicle floors (trailers, trucks, lorries, busses vans, etc.), railway wagon floors, ship decking, transport platforms etc. • Building applications: Working platforms, scaffolding, stages, warehouse and factory hall floors, loading docks, pedestrian bridges, warehouse shelves etc. MAJOR ADVANTAGES • Durable and weather resistant overlay • Slip resistant raised pattern surface • Light and dimensionally stable • Strong and rigid • Withstands impacts and other forms of bruising • Easy to machine and fasten using conventional woodworking tools and fasteners • Easy to clean • Good chemical resistance • Environmentally friendly • Weather and boil proof bonding BASE PLYWOOD The base plywood of Metsa Wood Top is Metsa Wood birch, which is made of cross-bonded 1.4 mm thick birch veneers and bonded with weather and boil-resistant phenol formaldehyde adhesive. OVERLAY The patterned phenolic film surface is dark brown, semi-glossy, hard and resistant to impact and abrasion. The phenolic film is also applied to the reverse side which is smooth. The phenol film is not UV resistant and depending on the overlay type the colour may change if exposed to sunlight over prolonged periods. SURFACE PROPERTIES The surface is hard and resistant to abrasion and rolling wear. The surface is also moisture resistant and can tolerate commonly used chemicals as well as diluted acids and alkalis. The surface is easy to clean with water or stream.
Open the catalog to page 1ABRASION AND ROLLING WEAR RESISTANCE OF METSA WOOD TOP (VALUES ARE INDICATIVE AND VALID FOR NEW UNUSED PANELS) OVERLAY WEIGHT TABER REVOLUTIONS12 ROLLING WEAR2 220 g / m2 700 5000 * Abrasion resistance is tested according to EN 438-2 /DIN 53799 ** Rolling wear resistance is determined by method corresponding to SS 923508. Rolling wear is an average calculated from the random rolling movements with a load of 200 kg, before the first signs of breakdown occur. EDGE SEALING Panel edges are sealed against moisture absorption with acrylic edge sealing paint. The standard colour of the edge...
Open the catalog to page 2All Metsäwood catalogs and technical brochures
-
FormPLUS
3 Pages
-
Form XL
3 Pages
-
Flex Smooth
2 Pages
-
Flex L
2 Pages
-
Flex
2 Pages
-
Integra
3 Pages
-
Kerto® LVL L-panel
2 Pages
-
WeatherGuard
3 Pages
-
Tuff MD
2 Pages
-
Sonex Light
2 Pages
-
Deck
2 Pages
-
Phoenix
2 Pages
-
PANEL PRODUCTS
8 Pages
-
Finnframe Floor System
36 Pages
-
DECKINGAND BALUSTRADING
12 Pages
-
Plywood for concrete formwork
16 Pages
-
Plywood for transport
16 Pages
-
Leno
24 Pages
-
Kerto Concept
32 Pages
-
Holzbausysteme
32 Pages
-
Panel Products
16 Pages
-
Kerto Portal Frames
4 Pages
-
Kerto-Ripa
8 Pages
-
Finnframe Flooring
36 Pages
-
Flooring Solutions
8 Pages
-
Timber Frame System
24 Pages
-
Timber Trade Pocket Guide
92 Pages
-
ThermoWood Claddings
32 Pages
-
Finnlife Log Cabins
20 Pages
-
Machined Mouldings
32 Pages
-
Decking
24 Pages
-
GLULAM
12 Pages
-
Kerto® ENGINEERED TO PERFORM
12 Pages
-
The SoundBar ®
12 Pages
Archived catalogs
-
FINNFOREST XL
4 Pages
-
Finnforest TUFF
4 Pages
-
FINNFOREST KING SIZE
4 Pages
-
FINNFOREST FREIGHT
4 Pages
-
Finnforest FLEX
4 Pages
-
FINNFOREST CONCRETE FORMWORK
24 Pages
-
Plywood Products
58 Pages
-
ThermoWood ®
8 Pages
-
ENDURA & FASTFORM
6 Pages
-
Plywood Products
16 Pages
-
Finnforest Kerto
12 Pages
-
Finnforest Glulam
12 Pages