Group: Metsäliitto
Catalog excerpts
PROFESSIONAL TIMBER FRAME SYSTEM FOR GARAGES AND CAR PORTS INCORPORATING THE BEAMLOCK SYSTEM
Open the catalog to page 1BUILDING WITH BEAMLOCK 03 HIPPED ROOF GARAGE TWO BAYWITH 40° ROOF PITCH 10 BARN-END GARAGE TWO BAYWITH 45° ROOF PITCH 11 GABLE-END GARAGE TWO BAYWITH 45° ROOF PITCH 12 GABLE-END GARAGE TWO BAYWITH 28° ROOF PITCH 13 HIPPED ROOF CAR PORT TWO BAYWITH 40° ROOF PITCH 14 TWO BAYWITH 45° ROOF PITCH 15 TWO BAYWITH 45° ROOF PITCH 16 TWO BAYWITH 28° ROOF PITCH 17 THE BENEFITS OF USING BEAMLOCK 20 GENERAL INFORMATION 02 PROFESSIONALTIMBER FRAME SYSTEM -
Open the catalog to page 2BUILDING WITH BEAMLOCK COULD NOT BE EASIER A high quality engineered system based upon the traditional oak bay framed method of construction, Beamlock achieves a traditional look with the reduced cost that only modern technology production methods can bring, and is quick and easy to build. Beamlock gives you a new trade: the look of traditional carpentry built with the reliability and precision of factory-cut components. Beamlock is a time-saver that’s delivered direct from factory to site and cuts construction times to the minimum. The results are stunning and long-lasting, yet the...
Open the catalog to page 3QUALITY CONSTRUCTION OPTIONAL CEDAR SHINGLES FEATHER-EDGE PROTECTIVE CLADDING VERTICAL SUB-FRAME UPRIGHTS Beamlock complies with BS EN 594 (interpreted to BS5268-6.1) for racking, BS6399 PT2 1997 for wind loading and BS476-21 fire resistance and is preservative treated for Use Class 3.1.* *A SECONDARY PROTECTIVE COAT NEEDS TO BE APPLIED AND MAINTAINED TO ACHIEVE “USE CLASS 3.” TIMBER SHROUD POST-SUPPORT COVER If you have any queries please contact our helpline on 01268 364 602 04 PROFESSIONAL TIMBER FRAME SYSTEM – FOR GARAGES AND CAR PORTS
Open the catalog to page 4PRE-CUT AND PRE-TREATED RAFTERS HIGH-STRENGTH BEAMS 138mm X 165mm PRE-CUT SUPPORTING BRACES SUBSTANTIAL SUPPORT POSTS 138mm X 138mm Garage and car port models with a 28° pitch (see pages 13 and 17), fitted with cedar shingles, will achieve a maximum height of 3997mm (adjustable feet at maximum height) provided that they are erected on level foundations at ground level. Garage and car port models (28° pitch) supplied without the cedar shingle roof tiles achieve a maximum height of 3932mm to the top of the ridge board, provided that they are erected on level foundations at ground level. When...
Open the catalog to page 5Beamlock two bay garages are available in two options: 1 Complete building with tile battens and cedar shingle tiles supplied. 2 Skeletalframework with roof timbers and clodded walls only (wof battens and cedar tiles not included). 1 HIPPED ROOF GARAGE WITH CEDAR SHINGLETILED ROOF 2 HIPPED ROOFGARAGE 40° roof pitch 40° roof pitch (Roof battens and cedar tiles not included) For full details see page 10 1 BARN-END GARAGE WITH CEDAR SHINGLETILED ROOF 2 BARN-END GARAGE 45° roof pitch 45° roof pitch (Roof battens and cedar tiles not included) For full details see page 11 If you have any queries...
Open the catalog to page 62.6m ENTRANCE GARAGE FLOOR PLAN (APPLIES TO ALL GARAGES SHOWN) FLOOR PLAN KEY 4.94m ENTRANCE 2.6m 5.614m BEAMS WITH WALLS BEAMS POSTS BRACES 5.216m 1 GABLE-END GARAGE WITH CEDAR SHINGLE TILED ROOF 2 GABLE-END GARAGE 45º roof pitch 45º roof pitch (Roof battens and cedar tiles not included) For full details see page 12 1 GABLE-END GARAGE WITH CEDAR SHINGLE TILED ROOF 2 GABLE-END GARAGE 28º roof pitch 28º roof pitch (Roof battens and cedar tiles not included) For full details see page 13 To add more bays to these garages see our extension kit on pages 18 & 19 FOR GARAGES AND CAR PORTS –...
Open the catalog to page 7Beamlock two bay car ports are available in two options: 1 Complete building with tile battens and cedar shingle tiles supplied. 2 Skeletalframework with roof timbers and clodded walls only roof battens and cedar tiles not included). 1 HIPPED ROOF CAR PORTWITH CEDAR SHINGLE TILED ROOF 2 HIPPED ROOFCAR PORT 40° roof pitch (Roof battens and cedar tiles not included) For full details see page 14 1 BARN-END CAR PORTWITH CEDAR SHINGLE TILED ROOF 2 BARN-END CAR PORT 45° roofpitch 45° roofpitch (Roof battens and cedar tiles not included) For full details see page 15 If you have any queries please...
Open the catalog to page 8trade professional 2.6m ENTRANCE CAR PORT FLOOR PLAN (APPLIES TO ALL CAR PORTS SHOWN) FLOOR PLAN KEY 4.94m ENTRANCE 2.6m 5.614m BEAMS POSTS BRACES SUPPORT POSTS 5.216m 1 GABLE-END CAR PORT WITH CEDAR SHINGLE TILED ROOF 2 GABLE-END CAR PORT 45º roof pitch 45º roof pitch (Roof battens and cedar tiles not included) For full details see page 16 1 GABLE-END CAR PORT WITH CEDAR SHINGLE TILED ROOF 2 GABLE-END CAR PORT 28º roof pitch 28º roof pitch (Roof battens and cedar tiles not included) For full details see page 17 To add more bays to these garages see our extension kit on pages 18-19 FOR...
Open the catalog to page 9HIPPED ROOF GARAGE TWO BAYWITH 40º ROOF PITCH 1. Hipped roof garage with battens and cedar shingle roof tiles supplied. SIDE ELEVATION Min. 4.705m Max. 4.765m 40º 2. Hipped roof garage supplied without cedar shingle roof tiles. Requires roofing material, covering approximately 44.73m2. Span 4.94m Min. 2.15m Max. 2.21m 5.216m For oor plan please refer to page 7 1. CODE Delivered 125281 Delivered & Erected 125282 SUPPLIED WITHOUT ROOF BATTENS AND CEDAR TILES CODE Delivered 125279 Delivered & Erected 2. SUPPLIED WITH ROOF BATTENS AND CEDAR TILES 125280 If you have any queries please contact...
Open the catalog to page 10BARN-END GARAGE TWO BAYWITH 45º ROOF PITCH 1. Barn-end garage with battens and cedar shingle roof tiles supplied. SIDE ELEVATION Min. 5.145m Max. 5.205m 45º 2. Barn-end garage supplied without cedar shingle roof tiles. Requires roofing material, covering approximately 47.36m2. Span 4.94m Min. 2.15m Max. 2.21m 5.216m For oor plan please refer to page 7 1. CODE Delivered 125285 Delivered & Erected SUPPLIED WITHOUT ROOF BATTENS AND CEDAR TILES CODE 125283 Delivered & Erected NOTE: THIS STRUCTURE MUST BE ERECTED ON A SUITABLY PREPARED FOUNDATION, NOT INCLUDED IN THE OPTIONAL INSTALLATION...
Open the catalog to page 11All Metsäwood catalogs and technical brochures
-
FormPLUS
3 Pages
-
Form XL
3 Pages
-
Flex Smooth
2 Pages
-
Flex L
2 Pages
-
Flex
2 Pages
-
Integra
3 Pages
-
Kerto® LVL L-panel
2 Pages
-
Top
2 Pages
-
WeatherGuard
3 Pages
-
Tuff MD
2 Pages
-
Sonex Light
2 Pages
-
Deck
2 Pages
-
Phoenix
2 Pages
-
PANEL PRODUCTS
8 Pages
-
Finnframe Floor System
36 Pages
-
DECKINGAND BALUSTRADING
12 Pages
-
Plywood for concrete formwork
16 Pages
-
Plywood for transport
16 Pages
-
Leno
24 Pages
-
Kerto Concept
32 Pages
-
Holzbausysteme
32 Pages
-
Panel Products
16 Pages
-
Kerto Portal Frames
4 Pages
-
Kerto-Ripa
8 Pages
-
Finnframe Flooring
36 Pages
-
Flooring Solutions
8 Pages
-
Timber Trade Pocket Guide
92 Pages
-
ThermoWood Claddings
32 Pages
-
Finnlife Log Cabins
20 Pages
-
Machined Mouldings
32 Pages
-
Decking
24 Pages
-
GLULAM
12 Pages
-
Kerto® ENGINEERED TO PERFORM
12 Pages
-
The SoundBar ®
12 Pages
Archived catalogs
-
FINNFOREST XL
4 Pages
-
Finnforest TUFF
4 Pages
-
FINNFOREST KING SIZE
4 Pages
-
FINNFOREST FREIGHT
4 Pages
-
Finnforest FLEX
4 Pages
-
FINNFOREST CONCRETE FORMWORK
24 Pages
-
Plywood Products
58 Pages
-
ThermoWood ®
8 Pages
-
ENDURA & FASTFORM
6 Pages
-
Plywood Products
16 Pages
-
Finnforest Kerto
12 Pages
-
Finnforest Glulam
12 Pages