Group: Metsäliitto
Catalog excerpts
kerto concept The Facade. The System. Kerto Concept®
Open the catalog to page 1precise systematic exceptional kerto concept The Facade. The System. Description of mullion / stick and facade cladding system
Open the catalog to page 2KERTO CONCEPT® MULLION / STICK KERTO CONCEPT® FACADE CLADDING 2 METSA WOOD - KERTO CONCEPT-
Open the catalog to page 3Discover the system for facades: kerto concept® Kerto Concept Facade System opens up a new dimension of design possibilities for architects and designers. The Kerto Concept system components are based on the proven technical properties of Kerto-S and Kerto-Q which have been held in high regard for many years by architects and engineers. KertoConcept.de Utmost precision, Visual APPEAL, Natural character, and exceptional classical aesthetics“ kerto concept® — METSÄ WOOD
Open the catalog to page 4kerto Concept® Mullion / Stick Discover the “supporting pillars” of the Kerto Concept® Mullion / Stick Facade System right now. The system components of the load-bearing Kerto Concept Mullion / Stick structure exploit the enormous technical advantages of Kerto-S*. Kerto-S is distinguished by comparatively low dead weight and the filigree dimensions, coupled with a high level of structural stability. Architects and designers have almost unlimited design options at their disposal for the conception and implementation of projects. The exceptional natural beauty of Kerto laminated veneer lumber...
Open the catalog to page 5Precision right from the start. The laminated veneer lumber, Kerto-S, is the ideal base material for the Kerto Concept Mullion / Stick structure. It leaves the factory with a minimal moisture content of approx. 9%, which is why shrinkage deformations such as contortions and cracks can be virtually eliminated with proper use. The slim, highly dimensionally stable cross-sections of the Kerto Concept Mullion/Stick Facade permit dimensions are available in width of 50/60/80 mm and 6 or 12 m standard lengths. The Kerto Concept Mullion / Stick Facade is ideally suited for use on the interior as...
Open the catalog to page 6Modular, precise, efficient Find out more about the Kerto Concept Mullion / Stick System components. METSÄ WOOD — kerto concept®
Open the catalog to page 7Completely and universally combinable. The slim, high-strength components of the Kerto Concept Mullion / Stick Facade are supplied by Metsä Wood either in standard length, or completely ready-to-fit, including glazing system. The following dimensions are available: Metsä Wood sees itself as a system provider and supplies the facade components in combination with glazing systems from different manufacturers, pre-assembled or as supply only. Exactly as required by the individual project. The system includes all required facade profile components: • Width 50/60/80 mm • Depth 120 – 300 mm (in...
Open the catalog to page 8Kerto Concept® Mullion / Stick Facade – the components at a glance. METSÄ WOOD — kerto concept®
Open the catalog to page 9Structural beam Kerto-S Structural beam Kerto-S, Fineline top veneer Basic profile with inner seal Aluminium cover strip with stainless steel screw connection Aluminium cover strip with stainless steel screws and clip-on aluminium cover strips Mullion / Stick connector in steel Mullion / Stick connector in aluminium Wooden panels, durably protected, with 10-year guarantee Aluminium cover strip with stainless steel screws, Clip-on Kerto cover strips *not included in scope of delivery kerto concept® — METSÄ WOOD
Open the catalog to page 10Technical specifications of the Kerto Concept® Mullion / Stick system components. The Kerto Concept Mullion / Stick Facade offers a proven technical system for the quick and easy assembly of glazing or infill panels. The basic profile with the inner seal ensures secure attachment of the desired pressure strips in the continuous aluminium screw channel. Basic profile with inner seal, aluminium cover strip with outer seal and exposed stainless steel screw connection METSÄ WOOD — kerto concept® Basic profile with inner seal, aluminium cover strip with outer seal, stainless steel screws and...
Open the catalog to page 11TABLE: PRELIMINARY COMPUTATION KERTO CONCEPT MULLIONS Assumption: Grid spacing (=infill panel size) corresponds to approx. half floor height The preliminary computation table is based on the main stress from wind (zone 2). Other loads have not been considered, however, they can be decisive in individual cases.
Open the catalog to page 12Kerto Concept® Mullion / Stick Facade, Construction details. Connection Facade-head rabbet* Connection Facade-wall* Connection Facade-ceiling* Connection Facade-base detail* * Examples of systems which can be adapted in practice. METSÄ WOOD — kerto concept®
Open the catalog to page 13Kerto Concept® Scope of delivery - Mullion / Stick Depending on the requirements of the client, Metsä Wood can supply different ranges of manufacture: Kerto Concept – Mullion / Stick bar stock: • Cross section with extra length for further machining, length 6,000 mm or 12,000 mm • ection widths 50/60/80 mm S • Section depths 120 – 300 mm • urfaces untreated S Kerto Concept Facade profile – Pre-fabricated Mullion / Stick profile: • Cross-section with finished surface • Mullion / Stick connection • Basic profile • Inner seal • Outer seal • Cover strip Kerto Concept® service package Advice /...
Open the catalog to page 14kerto concept® Facade Cladding. Be inspired: Kerto Concept® – the facade cladding with the durable aesthetics of wood – guaranteed long-lasting. Full of character, wood is a naturally beautiful material which offers many design and combination possibilities. Kerto Concept system components for facade cladding are based on the proven technology of Kerto-Q*. The incredibly dimensionally stable and high-strength panels offer architects, designers and clients the security of a guaranteed long-lasting surface which is resistant to environmental influences. This facade cladding is available in a...
Open the catalog to page 15Long-lasting and naturally ageing. The panels of the Kerto Concept Facade System for curtain walls are made out of dimensionally stable Kerto-Q veneer laminated wood panels. Thanks to the large-size panels, it is possible to adapt facade claddings to individual architectural requirements with low wastage by applying the Kerto Concept. The panels are available in thicknesses of 21or 27 mm with sheet dimensions of a maximum of 1.82 x 20.0 m. Based on these premises, virtually all facade design requirements can be implemented. The pressure treatment permits the use of Kerto for lasting facade...
Open the catalog to page 16All Metsäwood catalogs and technical brochures
-
FormPLUS
3 Pages
-
Form XL
3 Pages
-
Flex Smooth
2 Pages
-
Flex L
2 Pages
-
Flex
2 Pages
-
Integra
3 Pages
-
Kerto® LVL L-panel
2 Pages
-
Top
2 Pages
-
WeatherGuard
3 Pages
-
Tuff MD
2 Pages
-
Sonex Light
2 Pages
-
Deck
2 Pages
-
Phoenix
2 Pages
-
PANEL PRODUCTS
8 Pages
-
Finnframe Floor System
36 Pages
-
DECKINGAND BALUSTRADING
12 Pages
-
Plywood for concrete formwork
16 Pages
-
Plywood for transport
16 Pages
-
Leno
24 Pages
-
Holzbausysteme
32 Pages
-
Panel Products
16 Pages
-
Kerto Portal Frames
4 Pages
-
Kerto-Ripa
8 Pages
-
Finnframe Flooring
36 Pages
-
Flooring Solutions
8 Pages
-
Timber Frame System
24 Pages
-
Timber Trade Pocket Guide
92 Pages
-
ThermoWood Claddings
32 Pages
-
Finnlife Log Cabins
20 Pages
-
Machined Mouldings
32 Pages
-
Decking
24 Pages
-
GLULAM
12 Pages
-
Kerto® ENGINEERED TO PERFORM
12 Pages
-
The SoundBar ®
12 Pages
Archived catalogs
-
FINNFOREST XL
4 Pages
-
Finnforest TUFF
4 Pages
-
FINNFOREST KING SIZE
4 Pages
-
FINNFOREST FREIGHT
4 Pages
-
Finnforest FLEX
4 Pages
-
FINNFOREST CONCRETE FORMWORK
24 Pages
-
Plywood Products
58 Pages
-
ThermoWood ®
8 Pages
-
ENDURA & FASTFORM
6 Pages
-
Plywood Products
16 Pages
-
Finnforest Kerto
12 Pages
-
Finnforest Glulam
12 Pages