Catalogs >
Metsäwood >
Integra

Integra
3Pages

Catalog excerpts

Metsä Wood Integra is an overlaid plywood panel with excellent adhesion and painting properties. The durable surface allows the panel to be used in multiple end uses e.g. bonded floor constructions in vehicle frames, painted interior and exterior applications and concrete formwork. Applications Metsä Wood Integra with a tailor-made overlay ensures a durable finish with excellent adhesion and painting properties. Integra has a wide application range from paint-base panel to gluable floor components and concrete formwork panels. Integra panels are available in a wide range of thicknesses and sizes. • Transport: Bus floors constructions (UN/ECE Regulation No. 118 certificate), glued trailer floors, transport boxes • Concrete Formwork: Smooth and maintenance-free panel for different formwork uses. • Building: General interior and exterior building applications, hoarding panels, general paint-base panel, agricultural structures, showrooms and displays, stage constructions • Other: Traffic signs, sports arenas and equipment, packaging applications Major advantages • Versatile panel • Surface can be painted or glued • Excellent strength-to-weight ratio • Dimensionally stable • Strong and rigid • Easy to clean and re-use • Easy to machine and fasten using conventional woodworking tools and fasteners • Environmentally friendly • Weathe

Open the catalog to page 1

Base plywood Edge sealing The base plywood of Metsä Wood Integra is Metsä Wood Birch. Birch plywood is made of cross-bonded 1.4 mm thick birch veneers bonded with weather- and boil-resistant phenol formaldehyde adhesive. Panel edges are sealed against moisture absorption with acrylic edge sealing paint. Even though edge sealing slows down the absorption of moisture into the wood, it does not eliminate it completely. Designed and tailor-made to serve in demanding applications, birch plywood can be ordered with special oriented veneer structures to provide even higher strength and stiffness...

Open the catalog to page 2

Bonding classes Metsä Wood plywood panels are bonded with a weather- and boilresistant phenol formaldehyde adhesive. The gluing meets the requirements of the standard EN 314-2 / Class 3 (exterior). Formaldehyde emissions Determined according to EN 717-1, the formaldehyde emitted by Metsä Wood Integra falls far below the Class E1 requirement of ≤ 0.100 ppm and fulfils also the most stringent requirements in the world (≤ 0.030 ppm). The formaldehyde emission of Metsä Wood Integra is approximately 0.017 ppm. Panel strength properties Metsä Wood Integra is a CE marked product and its strength...

Open the catalog to page 3