video corpo

FormPLUS
3Pages

{{requestButtons}}

Catalog excerpts

FormPLUS - 1

Metsä Wood FormPLUS plywood is the phenolic film overlaid panel choice for all formwork uses with high concrete surface quality requirements. FormPLUS plywood surface has a special treatment to resist the surface rippling, whichensures the smooth high quality concrete surface from the first use. Applications Metsä Wood FormPLUS is a smooth surface, maintenance-free birch plywood panel for different concrete formwork applications: system shuttering, girder formwork, regeneration panels, element industry and concrete block industry. The durable overlays ensure smooth concrete finish and multiple uses. The number of uses can rise up to 30 – 100 but is highly dependent on the used overlay, site practice, requirements of concrete finish, the quality of release agent and the maintenance, handling and storage practices. Use high quality release agent to ensure easier and cleaner release. Make sure that the release agent is suitable with the panel overlay. Clean panels after each use to remove all concrete debris. Seal scratches with water proof paint and fill holes with water resistant filler. Afterwards, apply a fresh coat of release agent prior to each subsequent use. Major advantages • Surface resists rippling • Smooth durable overlay • Excellent strength-to-weight ratio • Dimensionally stablele • Strong and rigid • Easy to clean and re-use • Easy to machine and fasten using conventional woodworking tools and fasteners • Can withstand impacts and other forms of bruising • Environmentally friendly • Weather-

Open the catalog to page 1
FormPLUS - 2

Base plywood Size tolerances The base plywood of Metsä Wood FormPLUS is Metsä Wood Birch. Birch plywood is made of cross-bonded 1.4 mm thick birch veneers bonded with weather- and boil-resistant phenol formaldehyde adhesive. Measured in accordance with standard EN 324, the plywood size and squareness tolerances meet EN 315 requirements. Designed and tailor-made to serve in demanding applications, birch plywood can be ordered with special oriented veneer structures to provide even higher strength and stiffness properties. LENGTH / WIDTH A smooth and durable phenolic film is hot-pressed onto...

Open the catalog to page 2
FormPLUS - 3

Machining Metsä Wood FormPLUS plywood panels can be machined according to customer specification on request. Packing Metsä Wood FormPLUS panels are packed in moisture-resistant plastic wrapping. PACKING QUANTITIES NUMBER OF PANELS PER PALLET BY THICKNESS PANEL SIZE (mm) Further information This leaflet is provided for information purposes only and no liability or responsibility of any kind is accepted by Metsä Wood or their representatives, although Metsä Wood has used reasonable efforts to verify the accuracy of any advice, recommendation or information. Metsä Wood reserves the right to...

Open the catalog to page 3

All Metsäwood catalogs and technical brochures

  1. Form XL

    3 Pages

  2. Flex Smooth

    2 Pages

  3. Flex L

    2 Pages

  4. Flex

    2 Pages

  5. Integra

    3 Pages

  6. Top

    2 Pages

  7. WeatherGuard

    3 Pages

  8. Tuff MD

    2 Pages

  9. Sonex Light

    2 Pages

  10. Deck

    2 Pages

  11. Phoenix

    2 Pages

  12. Leno

    24 Pages

  13. Kerto Concept

    32 Pages

  14. Holzbausysteme

    32 Pages

  15. Panel Products

    16 Pages

  16. Kerto-Ripa

    8 Pages

  17. Decking

    24 Pages

  18. GLULAM

    12 Pages

Archived catalogs