Group: Metsäliitto
Catalog excerpts
Metsä Wood Flex L is a birch plywood panel overlaid with a coloured thermoplastic overlay. Flex L is available in range of colours and ready finished surfaces. The combination of technical properties with high class surfaces makes Flex L an excellent panel for various interior and transportation applications. Applications Base plywood Metsä Wood Flex provides an easy ready finished surface solution. • Transport industry: Side walls for horse and box trailers, side walls for light and medium size trucks, doors bulk heads, van linings and transit and flight cases • Building industry: Furniture, shop, kitchen and sanitary fittings, playground equipment, fencing and rebound walls The base plywood of Metsä Wood Flex L is Metsä Wood Birch. Birch plywood is made of cross-bonded 1.4 mm thick birch veneers bonded with weather-and boil-resistant phenol formaldehyde adhesive. Major advantages • High quality surfaces • Excellent impact and crack resistance • Easy to fix and cut • Good wear resistance • Easy to clean • Good resistance against most chemicals • Strong and rigid panel • Excellent strength-to-weight ratio • Dimensionally stable • Environmentally friendly Flex 06 overlay The panel is overlaid with white 0.6 mm thick structured (burl) polypropylene overlay. FLEX 06 is available in colour White06 (RAL 9016). Light grey06 (RAL 7001) overlay is available on request. Surface properties The surface of the overlay is slightly structured to improve wear and scratch resistance. Overlay is elastic, tough and does not crack easily. The overlay is safe to use and it is free of chlorine, halogens, plasticizer, formaldehyde and heavy metals. The surface is easy to clean with water and normal detergents. Strong acids, alkalis and e.g. acetone may cause vis
Open the catalog to page 1Metsä Wood Flex L plywood products have very high surface quality and the surface is susceptible to scratches due to its softer appearance, extra caution has to be practised in handling and storing the panels to prevent damage. Extreme moisture penetration may cause visible changes on the appearance of the product. Bonding classes Metsä Wood plywood panels are bonded with a weather- and boilresistant phenol formaldehyde adhesive. The gluing meets the requirements of the standard EN 314-2 / Class 3 (exterior). The overlay is bonded to plywood with weather-resistant adhesive (EN 204 class...
Open the catalog to page 2All Metsäwood catalogs and technical brochures
-
FormPLUS
3 Pages
-
Form XL
3 Pages
-
Flex Smooth
2 Pages
-
Flex
2 Pages
-
Integra
3 Pages
-
Kerto® LVL L-panel
2 Pages
-
Top
2 Pages
-
WeatherGuard
3 Pages
-
Tuff MD
2 Pages
-
Sonex Light
2 Pages
-
Deck
2 Pages
-
Phoenix
2 Pages
-
PANEL PRODUCTS
8 Pages
-
Finnframe Floor System
36 Pages
-
DECKINGAND BALUSTRADING
12 Pages
-
Plywood for concrete formwork
16 Pages
-
Plywood for transport
16 Pages
-
Leno
24 Pages
-
Kerto Concept
32 Pages
-
Holzbausysteme
32 Pages
-
Panel Products
16 Pages
-
Kerto Portal Frames
4 Pages
-
Kerto-Ripa
8 Pages
-
Finnframe Flooring
36 Pages
-
Flooring Solutions
8 Pages
-
Timber Frame System
24 Pages
-
Timber Trade Pocket Guide
92 Pages
-
ThermoWood Claddings
32 Pages
-
Finnlife Log Cabins
20 Pages
-
Machined Mouldings
32 Pages
-
Decking
24 Pages
-
GLULAM
12 Pages
-
Kerto® ENGINEERED TO PERFORM
12 Pages
-
The SoundBar ®
12 Pages
Archived catalogs
-
FINNFOREST XL
4 Pages
-
Finnforest TUFF
4 Pages
-
FINNFOREST KING SIZE
4 Pages
-
FINNFOREST FREIGHT
4 Pages
-
Finnforest FLEX
4 Pages
-
FINNFOREST CONCRETE FORMWORK
24 Pages
-
Plywood Products
58 Pages
-
ThermoWood ®
8 Pages
-
ENDURA & FASTFORM
6 Pages
-
Plywood Products
16 Pages
-
Finnforest Kerto
12 Pages
-
Finnforest Glulam
12 Pages