METRORESIN

Product catalog summary

Overview: The document outlines the application process and specifications for METRORESIN, a water-based polyurethane resin system used for floors and walls. It highlights the product's resistance to abrasion, chemicals, and water, and its suitability for a wide range of colors, including deep and vivid shades.

Specifications: METRORESIN is a non-yellowing, thick polyurethane resin system. It is designed for both new and existing surfaces, including concrete, ceramic, and stone. The system includes various components such as Resin Primer, Metroresin Body, Metroresin Solid, and Metroresin Gloss/Matt K.

Application Procedures:

New Concrete Floors: The process involves priming with Resin Primer, applying Metroresin Body with Quarzo 06, sanding, and finishing with Metroresin Solid and Metroresin Gloss/Matt K.
Existing Floors: The surface is abraded, primed with Metropox Fondo, and reinforced with fiberglass mesh. Metroresin Body is applied, followed by sanding and finishing with Metroresin Solid and Metroresin Gloss/Matt K.
New Walls: The process includes priming with Resin Primer, applying Metroresin Body, and finishing with Metroresin Gloss/Matt K.
Existing Walls: The surface is primed with Metrostone Primer, and if necessary, a render is applied. Metroresin Body is then applied, followed by Metroresin Gloss/Matt K.

Color Options: The document provides various color schemes, including tone-on-tone, bicolors, and variations of white, red, blue, and gray. Additional colors are available in the "Interior Trends" chart.

Recommendations: For enhanced wear and water resistance, Metrofloor Matt/Gloss can be used instead of Metroresin Gloss/Matt K. The document advises using the same batch of product on a single surface to avoid color discrepancies.

Technical Notes: Drying and application times may vary based on environmental conditions. For multi-colored or glossy finishes, additional coats of Metroresin Body or Glam may be applied.

Quality Assurance: The company operates under a quality management system certified by UNI EN ISO 9001.

Catalog excerpts

METRORESIN Ciclo di resine poliuretaniche all’acqua Water-based polyurethane resins cycle

Open the catalog to page 1

METRORESIN Ciclo a spessore a base di resine poliuretaniche, non ingiallenti, resistenti all'abrasione e agli agenti chimici, all'acqua. Per pavimenti e pareti. Idoneo a realizzare un'ampia gamma cormatica, inclusi colori vivaci e particolarmente scuri. Tecnica - Technique Per Pavimenti - For Flooring Undercoat RESIN PRIMER (on new level concrete, etc.) or METROPOX FONDO (on existing floors, ceramic, etc) Magritte Roller METRORESIN BODY + QUARZO 06+RESIN PRIMER (on new level concrete, etc.) or METROPOX FONDO + QUARZO 06 (on existing floors, ceramic, etc) -if * Finishing METRORESIN BODY (2 coats) Consolidating...

Open the catalog to page 2

Variazioni di bianco - White shades MARRAKE H Variazioni di rosso - Red shades Tono su tono - Tone on tone Tono su tono - Tone on tone Bicolore - Bicolours Bicolore - Bicolours Oltre alle tinte qui riprodotte, sono disponibili le tinte della cartella colori “Interior Trends” In addition to the colours here reproduced, the colours of “Interior Trends” chart are available.

Open the catalog to page 3

Variazioni di grigio - Gray shades HELSINKI Variazioni di blu - Blue shades Tono su tono - Tone on tone Tono su tono - Tone on tone Bicolore - Bicolours Bicolore - Bicolours Oltre alle tinte qui riprodotte, sono disponibili le tinte della cartella colori “Interior Trends” In addition to the colours here reproduced, the colours of “Interior Trends” chart are available.

Open the catalog to page 4

•CICLO METRORESIN SU PAVIMENTO PREESISTENTE IN CERAMICA, PIETRA E SUPPORTI DURI E A DIFFICILE ADESIONE O SU MASSETTO CEMENTIZIO AMMALORATO E NON COMPLANARE ( esclusi parquet, linoleum e moquette che sono da asportare ) Fase 1 (Giorno 1) Abradere la superficie per portare il pavimento a sufficiente opacità e porosità; applicare a Rullo per Fondo Magritte Metropox Fondo, affogandovi “fresco su fresco” la rete tessuta in fibra di vetro (Tessuto di Vetro). Consumo: 0,30 kg/m2. Fase 2 (Giorno 2) Dopo 12 ore*, rasare con Spatola Dentata Kandinsky (denti triangolari) una mano di Metropox Fondo (caricato...

Open the catalog to page 5

by IVAS® TmT Metropolis App Metropolis by Ivas ^ Metropolis Ivas @metropolis_iva METROPOLIS' PAINTS FOR LIFESTYLE by IVAS www.metropolis-ivas.com IVAS iIndustria Vernici S.p.A. - Via Bellaria, 40 - 47030 San Mauro Pascoli (FC) Italy - phone +39 0541 815 811 - fax +39 0541 815 815 Company with quality management system certified UNI EN ISO 9001

Open the catalog to page 7

METRORESIN

METRORESIN

Catalog excerpts

All METROPOLIS catalogs and technical brochures