AELLE-S 190 STH Certified performances The METRA window or door has not had any seepage of water even with a wind pressure equal to a speed of 136.6 km/h (900Pa). (0Pa) Air permeability EN 1026, EN 12207 The METRA window or door was subjected to a wind pressure equal to a speed of 111.54 Km/h (600 Pa) and passed the test with positive results. Air pressure applied Km/h Class achieved Resistance to wind load EN 12211, EN 12210 When the METRA window or door was subjected to a wind load equal to a speed of 157.74 Km/h (1000 Pa), neither breakages nor permanent deformation occurred. Air pressure applied With deflection Class achieved Casement windows and doors Characteristic of a closed vent to let air pass through when the internal and external pressures are mutually different; the smaller the volume dispersed, the greater the window or door quality. Capacity of a window or door subjected to high pressure and/or suction, such as those caused by wind, to remain within admissible deformation limits and to conserve its initial properties so as to ensure protection and safety to the users. METRA fastening reduces the traffic noise to the limit of a normal conversation. Capacity of a window and door to attenuate external noise. Up to 42 dB Thermal transmittance METRA’s windows and doors comply with the energy saving standards. Aluminium-wood windows and doors Sliding windows and doors Internal doors and partition walls Systems for Handrails Verandas Shading systems Photovoltaic applications Curtain walls *2 sash door 2500mm x 2500 mm Glass: Ug=0.6 W/m²K, psi=0.05 W/mK The heat transmission rate U is the heat flow which goes through the window or door according to m² of surface and for each degree of difference in temperature between exterior and interior. The unit of thermic transmission measurement is W/m²K. Accessories and design complements Finishing and colours Air pressure applied km/h Class achieved Capacity of the window or door to block seepage of water when it is struck by a water flow and there is a pressure difference between the internal and external side. AELLE-S 190 STH Aluminium-wood windows and doors METRA S.p.A. Via Stacca,1 - 25050 Rodengo Saiano (BS) Italy Tel. +39 030 6819.1 - Fax +39 030 6810363 [email protected] - www.metra.it METRA uses ecological paper for its documentation and low environmental impact printing products. METRA. THE ONLY COMPANY TO OFFER A COMPLETE RANGE OF PRODUCTS OUR SERVICE ALWAYS CLOSER TO CUSTOMERS Metra’s accessories guarantee enhanced performances to one’s own window and door frames. METRA’s toll free number is always available in order to support your ideas, suggesting new solutions and finally directing you to Metra’s point of sale. Metra’s pre and after sale service will always help you in each phase: from your frame choice to installation, from cleaning advice to traceability of your frame history. DESIGN AND STYLE METRA’s window and door frames include a wide range of aesthetic styles, adding thus value to the traditional and contemporary dwelling spaces, preserving in this manner the original features of buildings restored conservatively. The latest creations provide more luminosity to living spaces thanks to the tapered shapes and the reduced thickness of profiles. A huge variety of finishing, resistant and chromatically surprising! From metallic colours to sand effects, opaque, glossy………up to natural wood surface cladding the heart of aluminium. THE CHOICE OF ALUMINIUM Aluminium is becoming ever more present in our lives: from simple cans to high-speed trains. Aesthetically agreeable, malleable, extremely resistant and 100% recyclable. Aluminium is the ideal material for the creation of windows and doors. GREEN METRA is engaged in a low environmental impact production and all its products are Eco-friendly to the maximum extent. DESIGN COMPLEMENTS METRA Documentation Brochure AELLE-S 190 STH - English Edition: 10/2012 METRA’s POINT OF SALE METRA’s design complements are offered in a wide range of coordinated shapes distinguished by the original style capable of satisfying and harmonising the aesthetic requirements of any kind of dwelling environment. METRA’s point of sale is the place where people enter with a dr

AELLE-S 190 STH Certified performances The METRA window or door has not had any seepage of water even with a wind pressure equal to a speed of 136.6 km/h (900Pa). (0Pa) Air permeability EN 1026, EN 12207 The METRA window or door was subjected to a wind pressure equal to a speed of 111.54 Km/h (600 Pa) and passed the test with positive results. Air pressure applied Km/h Class achieved Resistance to wind load EN 12211, EN 12210 When the METRA window or door was subjected to a wind load equal to a speed of 157.74 Km/h (1000 Pa), neither breakages nor permanent deformation occurred. Air pressure...

Aluminium-wood windows and doors Technical features • Wide range of finishing • High-level design • Maximum thermal and acoustic insulation • Resistance and structural stability • Easy maintenance • Inalterability and durability over the time • No architectural barriers • High sliding comfort Glass thickness: 26 to 44 mm Aluminium-wood series: Frame basic profiles 190 mm Sash basic profiles 78 mm Air-water-wind tightness: EPDM gaskets Movement system: lifting sliding Max load: 300/400 kg each sash METRA Quality The use of products and accessories branded Metra, guarantees that you are using materials...

Aluminium-wood windows and doors Technical features • Wide range of finishing • High-level design • Maximum thermal and acoustic insulation • Resistance and structural stability • Easy maintenance • Inalterability and durability over the time • No architectural barriers • High sliding comfort Glass thickness: 26 to 44 mm Aluminium-wood series: Frame basic profiles 190 mm Sash basic profiles 78 mm Air-water-wind tightness: EPDM gaskets Movement system: lifting sliding Max load: 300/400 kg each sash METRA Quality The use of products and accessories branded Metra, guarantees that you are using materials...