VPN LTE ROUTER SCR-L200
2Pages

{{requestButtons}}

Catalog excerpts

VPN LTE ROUTER SCR-L200 - 1

The SCR-L200 is an industrial router that allows a secure connection between local and distant networks via the ultra fast LTE wireless standard. Both the built-in firewall and the ability to connect via VPN or IPsec, ensure the security of data. TECHNICAL DATA Power supply: Power consumption: System time: Firmware updates: 12…24 V DC (± 20%) typical approx. 2,5 W, max. 6,0 W Sleep mode: typical approx. 55 mW NTP client and server, real-time clock Incremental, fail-safe, automated via update server (http, ftp, https, ftps) Mobile communication: Networks: 2G/GPRS/EDGE: 900/1.800 MHz; CSD, GPRS/EDGE Class 12 (DL: max. 85,6 kbps, UL: max. 85,6 kbps) 4G/LTE*: 700, 800, 900, 1.800, 2.100 MHz (bands 1, 3, 8, 20, 28) LTE Cat. 1 (DL: max. 10,2 Mbps, UL: max. 5,2 Mbps) *Please check the availability of the LTE frequencies in the planned operating area. Above specified frequencies are currently used in Europe, Middle East, Africa and, to some extent, in the Asia-Pacific region, Australia and South America 1x SMA female* 1 Slot for 1 Mini-SIM card (2FF) Router: Function: Up to 5 IP networks local (LAN) or as WAN, VLAN incl. tags and trunk ports; own DHCP server per IP network, static routing, routing priority configurable; dynamic routing OSPF, BGP, RIP, RIPv2, RIPng; netfilters: DNAT, SNAT, IP/port forwarding, netmapping, DNS relay, dynDNS support OpenVPN (client and server), IPsec, GRE (incl. multi-port), DMVPN, IP filters (stateful firewall) also in VPN tunnel, several VPN tunnels in parallel possible, MAC filters, PPTP server WAN chains: several WAN accesses configurable (prioritised and event-controlled), WAN groups: parallel operation of WAN interfaces or VPNs, several OpenVPN servers Dual APN (cellular only): traffic division across 2 APNs - e.g. for separating payload and management data Änderungen und Irrtümer vorbehalten / Stand 09-2018

Open the catalog to page 1
VPN LTE ROUTER SCR-L200 - 2

DISPLAY / OPERATION LED display: Configuration: Power, WAN (Internet connection), Signal (for cellular radio) Local and remote web interface (http, https; with session management), command line interface (CLI), Telnet, SSH, ASCII and binary file (also for backup), configuration management with switchable profiles (event-controlled) Several users, different user roles and rights, certificate-based authentication with revocation list INTERFACES / SWITCH Ports: Operation mode: Function: 2 x RJ45 2x RJ45, 10/100 MBit/s, full/half-duplex, auto MDI-X, 1.5 kV isolation voltage Each port can be...

Open the catalog to page 2

All Meteocontrol catalogs and technical brochures