Metcoppo®
1Pages

Profiled PUR-insulated roof system, slope p ≥ 15% for residential construction. DESIGN METCOPPO® is a composite panel, comprising two metal plate coverings connected by a layer of PUR insulating material. It is self-supporting, monolithic, insulating, resistant and light. METCOPPO® panels are used as roofing elements with slopes ≥ 15% in the civil building sector and can be installed on any type of roof structure (wood and/or metal). The geometric configuration of the outer plate follows the shape of a classic roof tile, giving the panel a pleasant, elegant appearance. Panel fixing is of the “visible” type. The outer side of the panel made of tile shaped plate can be of pre-painted zinced steel, pre-painted aluminium or copper natural. The steel and aluminium may be pre-painted a brick red colour to look like classic roof tiles. The inner side of the panel is pre-painted zincked steel. The continuous thickness of the polyurethane insulating material makes an excellent barrier against the dispersion of heat in winter and the entry of the sun’s rays in summer. For additional technical information, refer to the METCOPPO® technical manual. Dimensional standard The panels are produced in modular widths of 1000 mm. and are available in the following standard lengths from a minimum of 2450 mm. to a maximum of 12600 mm. Inner side: Made of steel plate complying with UNI-EN 10326 Standard Thickness: 0.4 Surface 1: micro-staves with 25 mm. planes, pre-painted METCOLOR, MT 133 standard system Surface 2: embossed micro-staves, with 25 mm. planes, pre-painted METCOLOR, RAL 9010 standard system. Surface 3: stave depth 1.5 cm. pre-painted artificial wood METCOPPO metals sheet Upper frame Thermal Insulation: Polyurethane foam on request Class 2, complying with the Ministerial Decree of 26/06/1984. Normal thickness: 50 mm. Upper flange with lead seal Outer side: Made of steel plate, complying with UNI-EN 10326 Standard Thickness: 0,6 mm. Made of aluminium plate, complying with UNI-EN 485-2 Standard Thickness: 0.6 mm Made of copper plate, complying with UNI-EN 1172 Standard Thickness: 0.5 mm Surface corrugated, corrugation pitch 166.66 mm., corrugation depth 40 mm. Painted with a first coat of epoxy primer of a thickness not inferior to 5 micron and then a second coat of METCOLOR STANDARD RAL 8004 system, brilliancy 5 gloss (excluding copper). Lower flange Table of maximum loads Value guaranteed with specificated sheets in table. The spans l (m) as a function of a uniformly distributed overload p (daN/m2), have been obtained from load tests carried out in Metecno laboratories, and provide a deflection f ≤ l/200 with a safety coefficient that complies with the UEAtc standards for insulated panels, which have been established and are implemented by primary European Certifying Organizations. Panel weight External pre-painted steel sheet, 6/10 mm Internal pre-painted steel sheet, 4/10 mm Notched plug Pitch = 1000 Externa pre-painted aluminium sheet, 6/10 mm Internal pre-painted aluminium sheet, 4/10 mm Seal External copper sheet, 5/10 mm Internal copper sheet, 4/10 mm Panel weight External pre-painted steel sheet, 6/10 mm Internal pre-painted steel sheet, 4/10 mm Externa pre-painted aluminium sheet, 6/10 mm Internal pre-painted aluminium sheet, 4/10 mm External copper sheet, 5/10 mm Internal copper sheet, 4/10 mm