Specifications:
The Vector Round 9735 is a suspended fitting light fixture with a body made from extruded aluminium, painted with solvent-free epoxy polyester powders, and thermoset at 180°C after phosphate treatment. It offers direct and indirect symmetric light emission through an opal methacrylate (PMMA) diffuser. The light source has a CRI greater than 80, a color tolerance of 3 Step MacAdam, and a lifetime of 50,000 hours (L80B20). The fixture operates on a Class I wiring system with a power supply of 220~240V AC at 50-60 Hz. It has a protection rate of IP20.

Normatives and Safety:
The product complies with EN 60598-1, EN 60598-2-1, and photobiological safety standards EN 62471 and IEC/TR 62778, with an exempt risk classification of GR 0. It adheres to directives 2014/35/UE and 2014/30/UE.

Performance Data:
The fixture is available in various configurations with different lumen outputs and power ratings, ranging from 2239 lm at 30W to 8087 lm at 102.1W. The diameter options are 600mm, 900mm, 1200mm, 1500mm, and 1800mm, with corresponding weights and volumes.

Optional Features:
Upon request, the fixture can be finished with golden foil, corten, or RAL colors. It can also be equipped with a DALI dimmable electronic ballast and a higher CRI of over 90.

Manufacturer Information:
MetalMek Illuminazione S.r.l. is located at Via Ramazzotti, 10 - 20020 Lainate (MI) Italy. Contact details include phone: +39 029373157, fax: +39 02 93710176, and email: [email protected]. More information can be found on their website: www.metalmek.it.

Note: All technical specifications and data are subject to modification at any time and without notice.