Mountings Suspended fitting Surface mounted Body in extruded aluminium, painted with SOLVENT FREE, epoxy polyester powders, thermosetting at 180°C, after phosphate treatment. Cover plate removable in extruded aluminum painted with SOLVENT FREE epoxy polyester powders, thermosetting at 180 ° C, with phosphating surface pre-treatment. End caps Screwed in iron sheet Light emission Optic device retail symmetrical retail asymmetrical Treansparent PMMA lens (efficiency: 95%) CRI > 80 Lifetime 60000 ore L80B10 Color tollerance: 3-step MacAdam Wiring Class IST Light source Feeding 220~240V Ac 50-60 Hz Continuous line support (1.5 / 2.5mm2 ). Intermediate connections with quick coupling. Dial the product code according to your needs, following the order indicated in the table below. Regulations EN 60598-1 EN 60598-2-1 Photobiological safety EN 62471 IEC/TR 62778 Rischio esente – GR 1 Directives 2014/35/UE 2014/30/UE VERSIONS UPON REQUEST DALI dimmable electronic ballast LED CRI > 90 90 (90°) RA (retail asym.) RS (retail sym.) retail symmetrical retail asymmetrical Tutte le specifiche tecniche e i dati sono soggetti a modifica in qualsiasi momento e senza preavviso. All technical specifications and datas are subject to modification at any time and without notice. METALMEK ILLUMINAZIONE S.r.l. Via Ramazzotti, 10 - 20020 Lainate (MI) Italy tel. +39 029373157 - fax +39 02 93710176 - [email protected] - www.meta

4417SP1 Suspension kit consisting of a micrometric adjustment device, 2m long steel cable Ø1.2mm. (for info consult dedicated technical sheet) KIT-GANCIM5SPBI Kit for suspension/ceiling installation (set 2pcs) consisting of a powder-coated steel spring, with phosphating surface pretreatment and two selfdrilling screws. KIT-TESTATE7530SB End cap kit (set 2pcs) consisting of one blind head and one other with M16x1.5 cable gland in nickelplated brass and 8 flat-head screws for mounting. 7523-SP1 Kit for joining 2 elements consisting of a galvanized steel plate and 4 screws for fixing it. Tutte le...