Installation Suspension Body in extruded aluminium, painted with SOLVENT FREE, epoxy polyester powders, thermosetting at 180°C, after phosphate treatment. Wiring plate Removable extruded aluminum tray with aluminum extruded with white-colored epoxy-proof powders, thermosetting at 180 ° C, with surface phosphating pretreatment. End cap Screwed in sheet steel Light emission Optical device retail symmetrical retail asymmetrical Color tollerance: 3-step MacAdam Light sourcwe medium 60° UGR extra wide 110° PMMA lens (efficiency: 93%) Continuous line support (1.5 / 2.5mm2) with multi-phase plug type current collector. Quick-fit intermediate connections. Performance Protection rate: IP40 Dial the product code according to your needs, following the order indicated in the table below. Regulations EN 60598-1 EN 60598-2-1 Photobiological safety EN 62471 IEC/TR 62778 Directives 2014/35/UE UPON REQUEST VERSION DALI dimmable electronic ballast Emergency unit: 1/3 hrs Tutte le specifiche tecniche e i dati sono soggetti a modifica in qualsiasi momento e senza preavviso. All technical specifications and datas are subject to modification at any time and without notice. METALMEK ILLUMINAZIONE S.r.l. Via Ramazzotti, 10 - 20020 Lainate (MI) Italy tel. +39 029373157 - fax +39 02 93710176 - [email protected] - www.meta

4417SP1 Suspension kit consisting of a micrometric adjustment device, 2m long steel cable Ø1.2mm. (for info consult dedicated technical sheet) KIT-GANCI6530 Suspension installation kit consisting of: painted steel plate + threaded hook. KIT-TESTATE6530 End caps kit (2pcs set) consisting of: a closed endcap + one with M16x1.5 nickelplated brass cable gland and 4 self-tapping screws for fixing. 6523-SP1 Kit for joining 2 elements consisting of a galvanized steel plate and 4 screws for fixing it. KIT-TLINEAR .. Power supply connection kit consisting of a plug (5 / 7p), conductors and single-pole...