Catalogs >
Metalmek Illuminazione >
ALL IN ONE 8530

ALL IN ONE 8530
2Pages

Catalog excerpts

Mountings Suspended fitting Body in extruded aluminium, painted with SOLVENT FREE, epoxy polyester powders, thermosetting at 180°C, after phosphate treatment. Cover plate removable in extruded aluminum painted with SOLVENT FREE epoxy polyester powders, thermosetting at 180 ° C, with phosphating surface pre-treatment. Light emission Direct Optical device 60° Treansparent PMMA lens (efficiency: 95%) Retail Asym. Color tollerance: 3-step MacAdam Continuous line support (1.5 / 2.5mm2). Intermediate connections with quick coupling. Light source Dial the product code according to your needs, following the order indicated in the table below. 3 pole 5 pole 7 pole Regulations EN 60598-1 EN 60598-2-1 Photobiological safety EN 62471 IEC/TR 62778 Rischio esente – GR 1 DALI dimmable electronic ballast LED CRI > 90 Emergency unit: 1/3 hours Retail Asym VERSIONS UPON REQUEST RA (retail asym.) Tutte le specifiche tecniche e i dati sono soggetti a modifica in qualsiasi momento e senza preavviso. All technical specifications and datas are subject to modification at any time and without notice. METALMEK ILLUMINAZIONE S.r.l. Via Ramazzotti, 10 - 20020 Lainate (MI) Italy tel. +39 029373157 - fax +39 02 93710176 - info@metalmek.it - www.m

Open the catalog to page 1

KIT-SOSP8530 Suspension kit (set of 2 pieces) consisting of a micrometric adjustment device; a Ø 2mm, 2m long steel cable; a support plate and a fixing plate. KIT-TESTATE8530 End cap kit (set 2pcs) consisting of one blind head and one other with M20x1.5 cable gland in nickel-plated brass and 8 flat-head screws for mounting. KIT-GIUNTOLS8530 Kit for joining 2 elements consisting of a galvanized steel plate and 4 screws for fixing it. Tutte le specifiche tecniche e i dati sono soggetti a modifica in qualsiasi momento e senza preavviso. All technical specifications and datas are subject to...

Open the catalog to page 2