Glass Preparation and Processing Specifications

This document details the technical specifications and procedures for glass preparation, particularly for sliding doors using sets V-8050 and V-8200.

Key Parameters and Definitions

• PL (Passaggio Luce / Clear Opening Width): The clear opening width dimension, typically 5050 mm.
• LM (Larghezza Anta Mobile / Sliding Door Width): Calculated as (PL + 100) / 2.
• HM (Altezza Anta Mobile / Sliding Glass Height): Calculated as H + 150 mm, where H is the clear opening height.
• H (Altezza Passaggio Luce / Clear Opening Height): The clear opening height dimension.

Glass Thickness and Weight Limits

• Glass thickness ranges from 10 to 13.5 mm.
• Maximum supported weight per sliding door is 80 kg.
• Typical height limit is 1100 mm.

Mechanical Details and Fixings

• Fixing holes have a diameter of 22 mm with M6 threading.
• Angles of 90° are used for fittings and fixings.
• Specific distances and offsets are detailed, such as 5 mm, 10 mm, 27 mm, and others for precise positioning.
• Use of silicone and embedded caps (tappi annegati) for sealing and fixing glass panels.
• Incorporation of PVB (Polyvinyl Butyral) interlayer of 1.52 mm thickness for laminated glass.

Assembly and Components

• Use of a track (binario) system for sliding glass installation.
• Details on the embedding of caps within laminated colored glass for invisible point fittings (Indipendent V-8050).
• Use of gaskets (guarnizione) for sealing.
• Polished chrome (CR) finish and inox effect options for hardware.

Recommendations and Best Practices

• Ensure precise measurement of clear opening dimensions to calculate sliding door sizes accurately.
• Maintain glass thickness within specified ranges to guarantee structural integrity and compatibility with fittings.
• Use silicone and embedded caps to secure glass panels and prevent water ingress.
• Follow detailed drilling and fixing dimensions to ensure proper assembly and safety.
• Consider aesthetic finishes such as polished chrome or inox effect for hardware to match design requirements.

Summary of Critical Dimensions and Formulas

This structured approach ensures proper glass preparation, fitting, and installation for sliding door systems using the specified hardware sets.