Fire Ventilation Systems - brochure
8Pages

fire ventilation CONTROL SYSTEMS OVERPRESSURE SYSTEMS

fire protection devices examples of application

fire dampers and smoke exhaust dampers de cut-off fire damper amper for fire ventilation systems cut-off fire damper amper for fire ventilation systems Fire resistance of manufacturing, as well as method and Fire resistance depending on method of manufacturing, as well as method and place of installation. Fire resistance S - cut-off fire damper V - for fire ventilation systems (smoke exhaust) M - double-function for combined systems S - cut-off fire damper V - for fire ventilation systems (smoke exhaust) M - double-function for combined systems S - cut-off fire damper The damper has been...

fire dampers and smoke exhaust dampers amper, cut-off type and for fire ventilation systems Fire resistance depending on method of manufacturing, as well as method and place of installation. Fire resistance Fire resistance S - cut-off fire damper V - for fire ventilation systems (smoke exhaust) M - double-function for combined systems V - for fire ventilation systems (smoke exhaust) 101 - curtain partially in air stream 201 - curtain outside of air stream 301 - curtain outside of air stream (round damper) The damper has been designed for separating fire-hazardous zones from safe parts of...

fire protection devices cut-off fire valve Fire resistance Fire resistance Fire resistance Single or double speed motors. Single or double speed motors. -vertically mounted - horizontally mounted The fan has been designed to remove smoke and hot air from enclosed interiors during fire. It facilitates evacuation of people and protects the building structure and its fittings against high temperature, it also prevents the fire spreading to the neighbouring fire comfort and industrial ventilation systems as The fan has been designed to remove smoke and hot air from enclosed interiors during...

overpressure systems for vertical evacuation paths Overpressure system: Arrangement and quantity of each system element depend on 1. inspection and measurement elements the requirements, construction and location of the protected 2. smoke sensors staircase, lobby, lift shaft, etc. 6. mcr Omega control unit 7. pressure relief sets/* (roof or wall type) 8. intake-air sets/* (roof or wall type) 9. exhaust air/* (roof or wall type) 7 location and quantity depending on air demand of the system

table of initial choice of devices transfer dampers ventilation and air-conditioning ducts at penetrations through escape corridor made of aerated concrete blocks cut-off dampers for ventilation and air-conditioning ducts smoke exhaust dampers for studs framing