SkyLine-Plinth
1Pages

MEINERTZ SkyLine-Plinth Uses MEINERTZ SkyLine Plinth is a unique and aesthetically attractive solution which can be used to counteract cold downdraughts beside large glass panels, or as the primary heating source. It is mounted above the floor, and can thereby form an integrated design solution together with the window panel; an efficient heat source which can be scaled as necessary, and adapted to individual projects. The unit is supplied with elegant, integrated legs that hide the forward flow and return pipes. Can be installed in both new and exis-ting buildings. Designation MEINERTZ SkyLine-Plinth, type SP (number of water-filled pipes). Example: MEINERTZ SkyLine-Plinth, type SP06 Product MEINERTZ SkyLine-Plinth is made of 70 x 11 x 2.0 mm pressure-stable steel tubing with integrated legs. The individual elements are spaced 13 mm apart. Weight 2.31 kg/metre steel tubing Dimensions Depth: Number of elements x (13 + 11) – 13 mm Height: 200 – 350 mm Length: Max. 3000 mm The units can be produced in custom dimensions. Control and regulation The heat output may be regulated by ordinary radiator valves or motorised valves. It is possible to link up to three units together, to a maximum length of 3000 mm. The units can moreover be installed in a single contiguous belt, with the integrated legs functioning as intermediate plates. Connection 3/8” or 1/2” sockets are located in the legs, turned outwards from the gable ends or located beneath the water-filled pipes. The flow and return may be located on the same side by choosing the minimum type SP04 (3/8”) or SP05 (1/2”). When using motorised valves or downward-oriented sockets, the unit can be supplied with closed legs with no valve aperture. Heat output The estimated heat output at the temperature set 70/40/20 is 60 watts per metre of water-bearing pipe. Please contact MEINERTZ A/S for estimated outputs at other temperature sets. Air venting A 1/8” air vent is mounted. Load MEINERTZ SkyLine-Plinth can cope with loads of up to 80 kg for a length of 3000 mm. Surface finishing MEINERTZ SkyLine-Plinth is supplied powder coated as standard in colours RAL 7024 (graphite grey), RAL 9007 (aluminium grey) or RAL 9016 (white). For a supplementary charge, the units can be supplied in other RAL colours. Packaging MEINERTZ SkyLine-Plinth is carefully packaged in strong cardboard and wrapped in PE sheeting. Warranty We offer a five-year guarantee against defects in materials or workmanship, provided that the unit has been correctly handled and installed. Maintenance MEINERTZ SkyLine-Plinth can be cleaned using ordinary cleaning agents that do not contain abrasive. Scratches or damages to the surface lacquer may be repaired using traditional spray paint, or by hand-painting with a thin brush. MEINERTZ A/S Sverigesvej 11 · DK-8660 Skanderborg Telefon +45 8652 1811 · www.meinertz.com