1. Catalogs
  2. MEIKO
  3. MEIKO TopLine
video corpo

MEIKO TopLine

MEIKO TopLine
1 / 68 PagesView full catalog

MEIKO TopLine

Product catalog summary
Instructions for Use
Users must read and understand the instructions and related documents before using the MEIKO TopLine washer-disinfector. The product includes the appliance and documentation such as the EC/EU declaration of conformity and service manuals.
Declaration of Conformity
The washer-disinfector complies with Regulation (EU) 2017/745 on medical devices (Class IIa) and the 2011/65/EU Directive on hazardous substances.
Safety
Correct Use: Intended for cleaning and disinfecting human waste containers in healthcare facilities by trained staff.
Misuse: Includes using the appliance for non-intended purposes like heating objects or disposing of flammable liquids.
Safety Information: Ensure the appliance is in original condition, connected to a proper electrical system, and not placed in explosive or frosty environments. Use protective gear when handling chemicals.
Product Description
Overview of product variants, functional description, and options like detergent dosing and automatic doors.
Technical Data
Includes installation requirements and electrical safety standards.
Assembly and Commissioning
Professional installation is required, with specific authorizations for water and electrical connections.
Operation/Use
Details on operating the washer-disinfector, including using the membrane keypad and selecting cleaning programs. Options for automatic doors and door locks are discussed.
Maintenance and Cleaning
Regular maintenance and cleaning procedures are essential, including daily cleaning, descaling, and routine checks.
Decommissioning and Disposal
Guidelines for safely decommissioning and disposing of the appliance and its packaging materials.
Specifications
Classified into two categories based on CISPR 11:2009 standards. Class A appliances may cause radio interference, while Class B appliances do not require further actions.
Emergency Procedures
In emergencies, disconnect the appliance from the power supply using the local mains isolator.
Product Description
Includes models 10, 20, 30, and 40 with specific installation types and options like liquid cleaner dispensers and automatic doors.
Functional Description
Operates through a four-phase cleaning program: precleaning, cleaning, thermal disinfection, and recooling/drying, complying with DIN ISO 15883 Part 3 standards.
Technical Data
Includes protection class, installation conditions, water supply requirements, noise emissions, and adjustable A0 values.
Assembly and Commissioning
Installation by specialists is required, with commissioning restricted to authorized service technicians.
Operation/Use
Membrane keypad includes keys for cleaning programs and error indicators. Proper placement of care utensils is crucial.
Cleaning Procedures
Care utensils should be cleaned immediately after use, with a maximum non-use time of 30 minutes.
Cleaning Programmes
  • Basic Version: Short programme for cleaning and disinfecting care utensils. A0 value: 60, Running time: 430 s (DT-NDV), 245 s (DT-NDD), Minimum temperature: 70°C.
  • Standard Programme: For care utensils with human excreta. A0 value: 60, Running time: 430 s (DT-NDV), 275 s (DT-NDD), Minimum temperature: 70°C.
  • Intensive Programme: For utensils with strongly adhering excreta. A0 value: 60, Running time: 470 s (DT-NDV), 305 s (DT-NDD), Minimum temperature: 70°C.
Automatic Door Operation
Equipped with a sensor for automatic opening and closing. Programme starts automatically after door closure.
Door Lock with Code Entry
Code lock can protect operations like opening the door after programme end. Default code is set to 1 and can be changed by a service technician.
A0 Value Settings
Factory setting for A0 value is 60, adjustable up to 3,000 for a one-time programme run.
Canister Replacement
Only trained technicians should replace canisters, using appropriate PPE.
Slop Sink Flushing and Wash Chamber Rinsing
Ensure correct alignment of cleaning nozzles to avoid poor cleaning results.
Malfunctions and Error Messages
Common issues include door blockages and incomplete cleaning cycles. Display provides information, warnings, and error messages for troubleshooting.
Error Codes and Troubleshooting
Includes specific error codes like Error no. 502 for dosing monitoring and solutions such as informing MEIKO Service.
Service Level Settings
Accessing service level allows display/change of service parameters and other functions.
Maintenance and Cleaning
Regular maintenance includes electrical safety checks and cleaning nozzles. Daily cleaning should avoid aggressive agents on stainless steel.
Decommissioning and Disposal
Follow the Service Manual for decommissioning. Decontaminate old appliances before disposal and separate components by material for recycling.
See more

Catalog excerpts

MEIKO TopLine-1

Read the instructions for use before using the appliance!

 Open the catalog to page 1
MEIKO TopLine-2

3.1.5 Determination of activities according to category of personnel 10 3.5 What to do in the event of an emergency 14 4.4.3 Slop sink flushing with separate slop sink unit 21

 Open the catalog to page 2
MEIKO TopLine-3

8.2 Clean and disinfect care utensils (programme cycle) 32 8.2.1 Clean care utensils (basic version of the appliance) 34 8.2.3 Selecting the cleaning programme 37 8.2.4 Automatic door (AT), operation with sensor (option) 38 8.2.5 Automatic door (AT), operation with foot switch (option) 38 8.2.6 Door lock with code lock / code entry (option) 39 8.3 Factory setting of the A0 value 40 8.6 Perform slop sink flushing (option) 43 8.7 Wash chamber rinsing (option) 44 9.1 Call service levelCall service level 54 9.2 Display or change the list of service parameters 55 9.5 Set time switch for automatic...

 Open the catalog to page 3
MEIKO TopLine-4

13.1 Disposal of packaging materials 62

 Open the catalog to page 4
MEIKO TopLine-5

Before using the machine, read the instructions for use and the related documents carefully and keep them in a safe place and within easy reach. All serious incidents relating to the product must be reported to the manufacturer and the competent authority of the Member State. These instructions for use apply to the following models of appliance: MEIKO TopLine washer-disinfector The delivery contents include: • MEIKO TopLine washer-disinfector. • Documentation, for details see Related documents. In addition to these instructions for use, there are other documents that are available depending on...

 Open the catalog to page 5
MEIKO TopLine-6

Presentation conventions DANGER – indicates an imminently hazardous situation which, if not avoided, will result in serious injury or death. WARNING – indicates a potentially hazardous situation which, if not avoided, could result in serious injury or death. CAUTION – indicates a possible hazardous situation which, if not avoided, could result in minor or moderate injury or damage to property. Notices on use Note – indicates useful and important information about the product or its use. Award elements Description of the markup elements used in this document: • A bullet point designates an action...

 Open the catalog to page 6
MEIKO TopLine-7

The list shows the maximum possible symbols that can be used in conjunction with the washer-disinfector. The actual symbols applied vary depending on the design. The illustrations contained in this document are not necessarily true to the original or to scale. The illustration may deviate from the original, e.g. due to modifications to the product, but without diminishing the facts or comprehensibility.

 Open the catalog to page 7
MEIKO TopLine-8

This section reproduces the content of the EC/EU Declaration of Conformity for the product. Contents that are already included in the instructions for use (e.g. intended use) are not listed again. The signed EC/EU Declaration of Conformity with serial number is enclosed with the product. We declare under our sole responsibility for this Declaration of Conformity that this product complies with Regulation (EU) 2017/745 on medical devices. Product designation Washer-disinfector (MDA 0317) Basic UDI-DI 4 050187 001ZV Classification as per MDR (EU) 2017/745: Class IIa according to Annex VIII, Rule...

 Open the catalog to page 8
MEIKO TopLine-9

Only use the washer-disinfector for emptying, cleaning and thermally disinfecting human waste containers, such as: • Bedpans, commode buckets and their covers • Urine bottles • Hospital containers, e.g. bowls, urine collecting containers • Suction bottles • Similar products as listed above, used for similar purposes. Nursing staff (older than 14 years) in clinics, nursing and/or rehabilitation facilities who have been verifiably instructed in the use of the product. • Preferably utility rooms • Appliances for installation in ensuite bathrooms of patient rooms (only for MEIKO TopLine 30) in an...

 Open the catalog to page 9
MEIKO TopLine-10

3.1.5 Determination of activities according to category of personnel 3.2 Misuse Any use which is not detailed in the section on "Intended purpose" is contrary to List of foreseeable misuses: • Emptying of care utensils, although the holder is still equipped with freshly disinfected care utensils • Inserting care utensils incorrectly • Insertion of unsuitable utensils and objects (tableware) • Disinfection of objects for which a different method of preparation is stipulated e.g. instruments • Heating objects or keeping them warm (hot water bottles, pre-packaged food, etc.) • Disposal of solvents...

 Open the catalog to page 10
MEIKO TopLine-11

• Used for rubbish disposal (e.g. garbage, nappies, disposable gloves, syringes etc.). This also applies to excessive volumes of cellulose and disposable care utensils. • Activating the controls with pointed or sharp objects • Operation by untrained persons • Use of incorrect or non-approved process chemicals • Installing the canisters of process chemicals at an angle when empty (consequence: the appliance operates without chemicals and lime scale can be deposited) • Filling the process chemical canisters with different liquid • Failure to observe the specified maintenance cycles • Use of the...

 Open the catalog to page 11
MEIKO TopLine-12

Electrical safety The electrical safety of the machine is only ensured if the machine is connected to a properly installed protective conductor system. It is very important to verify this fundamental safety feature. If in doubt, have the local wiring checked by an electrician. The protective measures and the connection of the equipotential bonding of the machine and associated components must be carried out in accordance with the local regulations and the requirements of the local utility companies. Refer to the dimension sheet for the connection point. As an alternative, the operator can, acting...

 Open the catalog to page 12
MEIKO TopLine-13

• The water in the wash chamber and in the water tank is NOT safe to drink. • Take care when handling dosing agents (water softeners/rinse aids and detergents). They are corrosive substances. Observe the applicable safety regulations! Use safety eyeware and protective gloves. Observe the manufacturer’s safety instructions and safety data sheets when handling dosing agents. • Do not sit or stand on the opened wash chamber door. This could damage the appliance and cause injury. • Only use the approved dosing agents and do not mix them together. • Keep the instructions for use legible and complete...

 Open the catalog to page 13

All MEIKO catalogs and technical brochures

  1. WasteStar CC

    2  Pages

  2. TopClean D

    4  Pages

  3. MEIKO TOPIC

    60  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About ArchiExpo
ArchiExpo is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. ArchiExpo is an entity of VirtualExpo Group.