Construction plan LIMES
2Pages

Limes article overview CONSTRUCTION PLAN BASIS LAVA BROWN P OS T S ROUND | Ø 90 mm SQUARE | 90 x 90 mm OCTAGONAL | 90 x 90 mm OVAL | 90 x 60 mm L: 220 | 270 cm Cemented assembly Construction Wood Range Assembly on base plate SLATE GREY Assembly fundamentals LIMES fencing system 1. Dig all of the foundation holes (40 x 40 x 80 cm). Outdoor living, ® outdoor is megawood. 2. Fill the foundation hole with concrete to a depth of 10 cm. Position the frame in the foundation hole at a depth of -70. Precisely apply the lower edge of the post with the aid of a small brick. Apply concrete into the foundation hole to a level of -10. All posts must be vertically aligned. NATURAL BROWN CONS T RUC T I ON P LAN K 40 x 112 mm | L: 360 cm 40 x 145 mm | L: 420 cm COLOURS NUT BROWN NATURAL BROWN BASALT GREY LAVA BROWN SLATE GREY BASALT GREY LAVA BROWN SLATE GREY CONS T RUC T I ON WOOD ROUND | S Q UARE | OC TAG ONAL | OVAL Ø 90 mm | 90 x 90 mm | 90 x 90 mm | 90 x 60 mm L: 360 cm COLOURS LAVA BROWN SLATE GREY 1. A separate, suitable foundation 2. Pre-drill the holes on the post for is required. For this purpose, dig the base plate (7.5 x 85 mm). all of the foundation holes Screw the base plate to the post (40 x 40 x 80 cm) and fill with (4 M8 x 80, oval post: 3 M8 x 80). concrete to a height of 60 cm. Screw the base plate complete Allow to fully harden. Alternatively, with post to the foundation using a suitable anchoring system can a suitable anchoring system. be installed on-site. Transom assembly circumferential F ENCE SE T W I T H NE W S TA I NLESS S T EEL B AR Gradient of up to 10% without a diagonal cut to the panels Set for 1 fence section includes: 2 stainless steel bars incl. post fastening 1 insert bar 7 AUGUSTA PANELS incl. accessories T RANSOM SQUARE | 40 x 112 mm OVAL | 90 x 60 mm L: 178.6 cm Depending on the shape of the post, the transoms can be assembled at stipulated or desired angles so that the fencing system represents a variable and individual solution for all terrain and land. Note: When using oval posts in a straight fencing sequence, it is essential that the 90 mm side is always used for reinforcement. Posts are available separately. Can also be combined with all other post system types. Assembling the transom connectors B ASE P LAT E F OR P OS T S 120 x 120 mm | thickness 8 mm incl. 4 screws (M8 x 80 mm) SUPPLEMENTARY PRODUCTS T r a n s o m c o n n e c to r s T W O - PAR T ( P OS T S / B ARS ) incl. 4 screws (M6 x 30 mm) Blackened stainless steel Can be combined with any other Pole system. Pa n e l h o l d e r for wavy panels 16 units per section I n t e r n a l h e x ag o n a l screw M4 x 40 mm for Connecting Spacer 16 units per section Only use the posts measuring 2.20 m in length when assembling by screwing on to the base plate. Please note the maximum construction height of 2 m (upper edge of the floor to the upper edge of the post). Higher structures do not comply with the static requirements. Ensure a suitable foundation. Ensure that the bar connectors are fully engaged when performing the final assembly. This ensures full stability. Use the special panel lengths and our construction wood range when dealing with structures that adapt to the slope with a gradient of 3% and higher or our innovative stainless steel bar for gradients of up to 10% without needing to perform a diagonal cut on the panels. Observe the maximum dimension between axes of 190 cm and the maximum section height of 1950 mm (upper edge – terrain). When assembling the lower bar, ensure that a sufficient distance of at least 100 mm to the ground is maintained. In principle, all holes must be pre-drilled 0.5 mm smaller than the screw diameter and 5 mm deeper than the screw length. Countersink the drill holes for the bar connectors in order to ensure complete contact. Observe a drill hole edge distance of at least 10 mm. When assembling the posts and bars, please observe the stated clearance in terms of width / the distance between the post to the bar of 12 mm. The LIMES fencing system may only be erected in accordance with the structural options as illustrated here and which can be planned in the fencing configurator. No liability will be assumed for deviating structure types or if non-original megawood articles are used. Remove dry, loose dirt. Keep the fence section moist for approx. 15 minutes. Sufficiently soak the entire fence section. Clean the fence section with water, solid brush or scrubber and thoroughly rinse with water. F ENCE ELEMEN T COLON I A Panel Colonia, 7 sections Dimension between axes: Max. 190 cm (Oval post 187 cm) Section height: 185 cm S a n d pit s Individual design, on request B ENCH Length: 180 cm manufactured from 40 x 112 mm construction plank APPLICATION OPPORTUNITIES Use a 40 x 112 mm construction plank from the construction wood range as a transom as well as the panels measuring 210 mm in length when dealing with inclines greater than 3%. F ENCE ELEMEN T AU G US TA Panel Augusta, 7 sections Dimension between axes: Max. 190 cm (Oval post 187 cm) Section height: 185 cm HOR I ZON TAL F ENCE Transom, 7 transoms Dimension between axes: Max. 190 cm (Oval post 187 cm) Section height: 185 cm P l a n t c o n ta i n e r The construction wood is used to create a stable plant container which matches the megawood® terrace. STEPS The megawood® construction plank manages to convince thanks to its weathering resistance and stability. Dimension between axes: max. 80 cm (40 x 112 mm) max. 100 cm (40 x 145 mm) B AR The megawood® construction plank is the first choice, even in difficult areas. It can even be used for piers. Dimension between axes: max. 100 cm (40 x 112 mm) max. 120 cm (40 x 145 mm) F ENCE Fencing components manufacture from the megawood® construction plank and concrete: A combination for longevity. Dimension between axes: max. 170/180 cm (40 x 112 mm) max. 200/210 cm (40 x 145 mm) S a n d pit s Ideal for small children: Free from dangerous splinters and also extremely durable. Can also be used as a raised flowerbed at a later date. B ENCH manufactured from 40 x 112 mm construction plank Dimension between axes: max. 130 cm (40 x 112 mm) max. 160 cm (40 x 145 mm) When dealing with an inclined structure that follows the terrain, screw the transom connector to the centre of the diagonally cut bar. Construction drawings with precise dimensions (incl. cutting edges) can be created online in the fencing configurator. DOOR / G AT E 102 x 185 cm (Frame: 112 x 270 cm) incl. fittings, pre-aligned for profile cylinders Production available on request Assembly and production-related dimension tolerances regarding length, width and thickness are to be taken into account during assembly. All dimensions must be examined on site. We recommend cleaning the LIMES fencing system as required in temperatures of at least 15°C as outlined below: Note: LIMES system sizes which follow the slope can be installed on inclines measuring up to 3%. In doing so, please note that the dimension between axes is shortened (1.2 mm at 1%, 2.6 mm at 2% and 4.16 mm at 3%). The circumferential gap also changes when performing the assembly with corrugated panels. When assembling the panels / profiles, pay attention to the connection of the groove and spring in order to ensure dimensional accuracy. Care instructions • 2. Screw the “Pfosten“ (post) 3. On the frontal side of the transom, 4. Left hand side fully engaged, connecting part to the post using centrally pre-drill and countersink right hand side attached but the supplied M6 x 30 screws. the holes (5.5 x 35 mm). Screw not fully engaged. Note: Please pay attention to the the “Riegel“ (transom) connecting label entitled “OBEN“ (top). part to the bar using the supplied M6 x 30 screws. The bar connectors on the stainless steel bar have already been pre-assembled. The LIMES fencing configurator is available online at www.megawood.com/133 Planning principles • 1. Hold the “Pfosten“ (post) connecting part to the post and mark on the drill holes. Pre-drill and countersink (5.5 x 35 mm). Note: Please pay attention to the label entitled “OBEN“ (top). Structural adaptation to the slope This basic construction plan illustrates the structure of the system elements and the fundamental assembly procedures. However, it is unable to depict all versions. Please use our LIMES fence configurator that is available online for individual structure versions. The diverse planning opportunities and the associated construction drawing make it possible to utilise the LIMES fencing system according to your personal needs. Available in system dimensions, the LIMES fencing system can also be individually tailored to your garden needs as is the case with all megawood® products. Install angles, recesses, inclines or stepped gates. The new stainless steel bar enables the construction of a 10% gradient without needing to perform a diagonal cut on the panels and is available in a special length in the set with corrugated panels. Observe information provided by the concrete manufacturer when assembling in the ground with a concrete foundation. Allow the concrete to harden before performing the next assembly step. Comprehensive descriptions for the assembly of the articles listed here can be found in the product data sheets enclosed in the scope of delivery. The LIMES fencing system offers diverse visual protection and fencing combination opportunities. The connection is established by special panel holders and the innovative bar connectors from megawood® that compensate for natural linear expansion. Gradient of up to 10% possible without a diagonal cut to the panels when using the fence set complete with stainless steel bar. Structure versions F I LL I N G S Panel Augusta (wavy) Fastening with panel holders Panel Colonia (smooth) Fastening with H-Moulding COLOURS F ENCE ELEMEN T AU G US TA W I T H S TA I NLESS S T EEL B AR Panel Augusta, 7 sections Dimension between axes: Max. 190 cm (Oval post 187 cm) Section height: 185 cm Gradient of up to 10% possible without a diagonal cut to the panels when using the stainless steel bar. Attention: Connect the frame to the post in a force-locking manner using 5 M8 x 80 screws per side and then encase into concrete together. F ENCE ELEMEN T Inclined adaptation to the slope F ENCE ELEMEN T Stepped adaptation to the slope Note: Use the special bar lengths from the construction wood range when dealing with structures that adapt to the slope with a gradient of 3% and higher. Gradient of 10% possible without a diagonal cut to the panels when using the stainless steel bar. F ENCE ELEMEN T Angle structure I m pR I N T Publisher: NOVO-TECH TRADING GmbH & Co. KG, Siemensstraße 31, 06449 Aschersleben, Germany Conception/design/layout: toolboxx-media, Magdeburg Picture credits: Christian Wolf, Henning Weidhase, Elisa Haubert Subject to change. Colours and graphics may differ due to printing processes.