GRAB BARS AND ACCESORIES FOR A BARRIER-FREE WASHROOMFolding seat AM0201CS Satin finish AM0201C Bright finish General description • Folding seat made in stainless steel AISI 304, satin or bright finish. • Suitable to achieve barrier-free accessibility in bathrooms and public spaces. It can be installed inside the shower. • Highest durability and rusting resistance. Easy cleaning. • Designed to withstand a maximum load of 120 kg, provided it is properly mounted to the wall. • Structural assembly shall be of welded construction and all exposed edges and corners shall be radiused and/or deburred. • Fulfils the requirements of the EN 16139 standard (“Furniture - Strength, durability and safety -Requirements for non-domestic seating"). Components & materials • AM0201C: folding seat made in stainless steel AISI 304, bright finish. • AM0201CS: folding seat made in stainless steel AISI 304, satin finish. • SLOTS: 4 for water drainage made in stainless steel AISI 304, 1.7 mm thick. • TUBE FRAME: made in stainless steel AISI 304 tube 0 32 mm and 1.5 mm thick with rounded corners for maximum safety. • WALL BRACKETS: 2 made in stainless steel AISI 304, 2.6 mm thick, fixed to the tub with one shaft, made in stainless steel as well, diameter 10 mm and metric 6 mm in both terminals. Technical Specifications Tube diameter 0 32 mm Tube Thickness 1.5 mm Max. Supported load (*) 120 kg Maximum force supported (*) 1,177 N Change manually the position of the folding seat to mount it in vertical position or in horizontal position.Mounting Recommended heights distance from the floor430-510 mm from the ground to the top of the seat. Mediclinics, S.A., reserves the right to make changes and/or modifications to the products and their specifications without prior notice.