BABY CHANGING STATIONS BABYMEDI
2Pages

BABY CHANGING STATIONS BABYMEDI SURFACE-MOUNTED CP0016H Polypropylene white finish Surface-mounted baby changing stations made of bacterialresistant polypropylene (CP0016H and CP0016HCS) and with stainless steel AISI 304 exterior (only CP0016HCS). BabyMedi® changing stations offer a very high level of safety and cleanliness being the ideal solution for public spaces such as, shopping centers, airports, public buildings, childcare centres, etc. Models suitable for high traffic facilities with high strength and durability. Their trendy and stylish design, allow these baby changing stations to blend into any space perfectly. Biocote® antimicrobial additive, based on ion silver technology, is embedded into its own surface, promoting an easy cleaning and reducing the growth of odor causing and staining microbes. BabyMedi® baby changing stations are supplied (inside the packing box) with child protection straps made of nylon. A pair of bag hooks (one at the right side and the other one at the left) help to keep personal belongings close and at hand. CP0016HCS Polypropylene /Stainless steel satin finish Technical Specifications Weight (empty) Liner dispenser capacity Recommended installation height Recommended installation height (handicapped) BabyMedi® units fully comply with the EN 12221-1 and EN 122212 standards that require baby changing stations be able to support a 50 Kg static load test during one hour. Moreover, units tested in our own laboratories have withstood loads over 100 kg. CP0016H: surface-mounted baby changing station made of polypropylene in white finish. CP0016HCS: surface-mounted baby changing station made of polypropylene and with a stainless steel AISI 304 exterior, in satin finish. BED: with a 1,900 cm2 contoured changing surface area is made of polypropylene in white finish with Biocote® antimicrobial additive embedded into its own surface, promoting an easy cleaning and reducing the growth of odor causing and staining microbes. LINER DISPENSER: with lock is made of polypropylene and holds approximately 80 bed liners, minimizing operator refills and discouraging potential vandalism. OPEN/CLOSE MECHANISM: concealed from the user’s view, it consists of a pair of reinforced hinges and a pneumatic cylinder, ensuring high durability and a smooth opening and closing of the baby changing station. MOUNTING CHASSIS: made of steel with a cataphoresis treatment. The corresponding mounting hardware is supplied, making very easy the installation of the unit to the wall. FRONTAL CHASSIS: (only CP0016HCS) made of one-piece AISI 304 stainless steel, 0.8 mm thick, fixed to the bottom of the bed by means of 4 bolts and 4 nuts, always concealed from the user’s view, without joints or edges to ensure the user´s safety, a better cleaning and an easy blending with other satin-finish accesso

OPERATION Open the BabyMedi® baby changing station. Place the baby in the centre of the bed and change your baby´s diapers. Close the BabyMedi® station. Under no circumstance should the baby be left unattended at any time on top of the baby changing station in order to avoid injury from falling or slipping. MOUNTING Fix the mounting chassis on the wall using the provided screws through the mounting chassis holes (points indicated by an “S” in the figure below) and always following, step by step, the detailed instructions contained in the “Installation and safety instructions manual”,...