Horizontal Wall-mounted OVERVIEW CP0016H/CP0016H-I An ideal solution for public spaces, suitable for high-traffic facilities. Incorporates the Biocote® antimicrobial additive based on silver ions, which reduces the growth of bacteria. Includes an adjustable nylon safety belt with a quick-release fastening system. The belt is supplied inside the packaging box. A version with ionizer is available under the following codes: CP0016V-I, CP0016VCS-I, CP0016VCSB-I. The effectiveness of the ionizer against viruses and bacteria has been tested and certified by TÜV Rheinland (Microbiological Test Report No. 60329708-001). CP0016HCS/CP0016HCS-I Polypropylene/Stainless Steel AISI 304 Horizontal baby changing unit for direct wall installation. Polypropylene/Stainless Steel AISI 304 Type 1 baby changing unit, intended for use from birth up to 12 months of age and up to a maximum weight of 20 kg. Certified in accordance with DIN EN 12221-1 and EK5/AK3 18-02 standards. These standards require baby changing units to withstand a static load test of 50 kg for 1 hour. In addition, units tested in our own laboratories have withstood loads of over 100 kg. TECHNICAL DATA Empty weight CP0016V Recommended Installation height 80 units Recommended installation height (handicapped) Bed: approximately 1,900 cm², made of polypropylene. Disposable liner dispenser: with lock and special Mediclinics key, made of polypropylene. Opening/closing mechanism: always concealed, consisting of a pair of reinforced steel hinges and a pneumatic cylinder. PVD COATING AVAILABLE (consult us) Mediclinics S.A. reserves the ri ght to make changes or modifications to the products a nd their specifications without prior notice. 800 mm at lowest point 700 mm at lowest point Baby changing stations Babymedi®

GUIDE SPECIFICATION Wall-mounted horizontal baby changing station shall be made of polypropylene and shall be available in two versions: with a front panel made of white polypropylene, or with a front panel made of AISI 304 stainless steel in satin, matte black, and various PVD finishes. The white polypropylene version shall weigh 12,4 kg, while the stainless steel version shall weigh 16,0 kg. The unit shall include a built-in liner dispenser with a capacity of 80 units and an adjustable safety strap made of nylon. The changing bed shall measure 1.900 cm², shall be made of polypropylene, and...