MEACRET LINE 200

Product catalog summary

Overview
The MEACRET LINE 200 is a robust and efficient slotted drainage system made from high-quality concrete (grade C45/55). It is designed to handle high loads and severe weather conditions, making it suitable for roads, highways, tunnels, industrial areas, and ports.

Specifications

Type I channel according to DIN 1433, eliminating the need for additional concrete encasement.
Available in standard lengths from 1 m to 4 m, with intermediate lengths on demand.
Nominal width: 200 mm.
Loading class up to F 900 according to DIN EN 1433.
Available with continuous or interrupted slots, with or without fall.
Can be paved directly and is silent due to no moving parts.
Also available as a curb channel with various border heights (7, 12, 15, and 18 cm).

Installation Instructions

Installation must adhere to the loading class D 400 / E 600 according to DIN EN 1433.
Substrate should be compacted to at least 45 MPa.
Special requirements due to local conditions should be determined by the planner.
Expansion joints should be spaced 25 m to 30 m apart in Central Europe, with adjustments for extreme climates.
Occupational health and safety regulations must be observed.

Benefits

Durable and cost-efficient solution for water management.
Flexible installation options to suit various environments.
High load capacity and resistance to environmental influences.

Recommendations

Consult with application engineering for drainage of high dynamic load areas.
Ensure compliance with local planning specifications and environmental exposure classes.

Catalog excerpts

LONG LASTING AND EFFICIENT SLOTTED DRAINAGE SYSTEM MADE OF CONCRETE ROBUST, DURABLE, COST-EFFICIENT, SAFE

Open the catalog to page 1

With continuous or interrupted slot With and without fall Loading class up to F 900 according to DIN EN 1433 High quality concrete (grade C 45/55) Nominal width: 200 mm IMEACRET LINE 200 RELIABLE AND EFFICIENT MEACRET LINE 200 is a particularly robust drainage system made of high quality concrete (grade C45/55). It has been designed to withstand the highest loads and the most severe weather events. The drainage channel is ideal for installation in areas such as: > roads and highways > tunnels > industrial areas and ports > container terminals The MEACRET LINE is a type I (i) channel in accordance...

Open the catalog to page 2

> Loading class up to E 600 / F 900 according to DIN EN 1433 > Can be paved directly > No moving parts: silent > Standard lengths: 1 m, 2 m, 3 m, 4 m; Intermediate lengths on demand > Flexible: Also available as a curb channel with bord heights of 7, 12, 15 and 18 cm BENEFITS FOR PLANNERS AND USER

Open the catalog to page 3

IMEACRET LINE 200 INSTALLATION INSTRUCTION LOADING CLASS D 400 / E 600 installation EN 1433 ACCORDING TO DINinstruction MEACRET LINE 200 Loading class D 400 / E 600, according to DIN EN 1433 Joint sealant type N2 according to ZTV (elastic, compressible and stable in volume, NOT extruded) bituminous joint grouting *** Substrate compacted to at least 45 MPa Plan expansion joint in paving slab 1 Fahrbahnbeton Bituminöse Deckschicht *** Tragschicht gem. RStO 5 Erdreich 2 Bituminöse Tragschicht *Bewehrung und Expositionsklassen nach Angabe des verantwortlichen Planers. *** Entwässerung von hoch dynamisch...

Open the catalog to page 4

Wenn von planerischer Seite keine anderen Vorgaben vorliegen,empfehlen wir die Einhaltung von Dehnfugen wie dargestellt THREAD JOINTS according to planner specifications according to planner specifications 1. Dehnfugen 2. Dehnfugen no other specifications from the planning side, we recommend to stick to the thread joint as shown in the drawing. If there are senkrecht zum Rinnenstrang in der Betonummantelung. MEA-Empfehlung für Zentral-Europa: Abstand der Dehnfugen quer zum Rinnenstrang 25m bis 30m. 1. Expansion joints In Ländern mitjoints perpendicular to the channel line in the concrete casing...

Open the catalog to page 5